sample of publications

• articles 

  • The Antimicrobial Activity of Micron-Thin Sol-Gel Films Loaded with Linezolid and Cefoxitin for Local Prevention of Orthopedic Prosthesis-Related Infections.  Gels.  9:1-19. 2023
  • Influence of Addition of Antibiotics on Chemical and Surface Properties of Sol-Gel Coatings.  Materials.  15:1-20. 2022
  • Extrusion-based additive manufacturing of Ti3SiC2 and Cr2AlC MAX phases as candidates for high temperature heat exchangers.  Journal of the European Ceramic Society.  42:841-849. 2022
  • Sinterability, mechanical properties and wear behavior of Ti3SiC2 and Cr2AIC MAX phases.  Ceramics.  5:55-74. 2022
  • A New Antifungal-Loaded Sol-Gel Can Prevent Candida albicans Prosthetic Joint Infection.  Antibiotics-Basel.  10:711. 2021
  • Injection moulding of porous MAX phase Ti3SiC2 without using space-holder.  POWDER TECHNOLOGY.  380:96-105. 2021
  • Response of electroless copper coated CFRP laminates to emulated lighting strikes.  COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING.  140:1-10. 2021
  • Study of the synthesis of MAX phase Ti3SiC2 powders by pressureless sintering = Estudio de la síntesis de polvos de la fase MAX Ti3SiC2 por sinterización sin presión.  BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO.  60:41-52. 2021
  • Organic-inorganic hybrid coatings containing phosphorus precursors prepared by sol-gel on Ti6Al4V alloy: Electrochemical and in-vitro biocompatibility evaluation.  PROGRESS IN ORGANIC COATINGS.  148:1-9. 2020
  • Electrochemical characterization of coatings for local prevention of Candida infections on titanium-based biomaterials.  PROGRESS IN ORGANIC COATINGS.  146:1-16. 2020
  • A Biodegradable Antifungal-Loaded Sol-Gel Coating for the Prevention and Local Treatment of Yeast Prosthetic-Joint Infections.  Materials.  13:3144. 2020
  • A New Antibiotic-Loaded Sol-Gel can Prevent Bacterial Intravenous Catheter-Related Infections.  Materials.  13:2946. 2020
  • Study on the growth and properties of electrolessly deposited thin copper coatings on epoxy-based CFRP.  Coatings.  10:1-16. 2020
  • The effect of the organosilane content on the barrier features of sol-gel anticorrosive coatings applied on carbon steel.  PROGRESS IN ORGANIC COATINGS.  139(105418). 2020
  • A new antibiotic-loaded sol-gel can prevent bacterial prosthetic joint infection: from in vitro studies to an in vivo model.  Frontiers in Microbiology.  10:1-14. 2020
  • Enhancing the corrosion protection of AA2024-T3 alloy by surface treatments based on Piperazine-modified hybrid sol-gel films.  Metals.  10. 2020
  • Experimental and numerical analysis of effects of supercritical carbon dioxide debinding on Inconel 718 MIM components.  POWDER TECHNOLOGY.  355:57-66. 2019
  • Functionalization of sol-gel coatings with organophosphorus compounds for prosthetic devices.  COLLOIDS AND SURFACES B-BIOINTERFACES.  181:973-978. 2019
  • Dry sliding wear behaviour of beta-type Ti-Nb and Ti-Mo surfaces designed by diffusion treatments for biomedical applications.  Journal of the Mechanical Behavior of Biomedical Materials.  91:335-344. 2019
  • Electrochemical study of the synergic effect of phosphorus and cerium additions on a sol-gel coating for Titanium manufactured by powder metallurgy.  PROGRESS IN ORGANIC COATINGS.  124:267-274. 2018
  • Corrosion and tribocorrosion behaviour of beta-type Ti-Nb and Ti-Mo surfaces designed by diffusion treatments for biomedical applications.  CORROSION SCIENCE.  140:51-60. 2018
  • Cellular behaviour of bone marrow stromal cells on modified Ti-Nb surfaces.  MATERIALS & DESIGN.  140:452-459. 2018
  • In-vitro study of the bioactivity and cytotoxicity response of Ti surfaces modified by Nb and Mo diffusion treatments.  SURFACE & COATINGS TECHNOLOGY.  335:148-158. 2018
  • Role of beta-stabilizing elements on the microstructure and mechanical properties evolution of modified PM Ti surfaces designed for biomedical applications.  POWDER METALLURGY.  61:90-99. 2018
  • Surface modification of powder metallurgy Titanium by colloidal techniques and diffusion processes for biomedical applications.  ADVANCED ENGINEERING MATERIALS.  19. 2017
  • Electrochemical comparative study on corrosion behavior of conventional and powder metallurgy titanium alloys in physiological conditions.  Metal Powder Report.  7:118-123. 2017
  • Sintering optimisation of Fe-Si soft magnetic materials processed by metal injection moulding.  POWDER METALLURGY.  60:112-119. 2017
  • Biocompatibility and corrosion protection behaviour of hydroxyapatite sol-gel-derived coatings on Ti6Al4V alloy.  Materials.  10. 2017
  • Influence of thermal debinding on the final properties of Fe-Si soft magnetic alloys for metal injection molding (MIM).  JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS.  416:342-347. 2016
  • Scanning electrochemical microscopy characterization of sol-gel coatings applied on AA2024-T3 substrate for corrosion protection.  CORROSION SCIENCE.  111:625-636. 2016
  • New processing route for ZrSiO4 by powder injection moulding using an eco-friendly binder system.  BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO.  54:93-100. 2015
  • Capillary rheology studies of INVAR 36 feedstocks for powder injection moulding.  POWDER TECHNOLOGY.  273:1-7. 2015
  • Effect of heat treatment of magnesium alloy substrates on corrosion resistance of a hybrid organic-inorganic sol-gel film.  RSC Advances.  5:105735-105746. 2015
  • Influence of substrate composition on corrosion protection of sol-gel thin films on magnesium alloys in 0.6 M NaCl aqueous solution.  PROGRESS IN ORGANIC COATINGS.  77:1642-1652. 2014
  • Oxidation and corrosion protection by halide treatment of powder metallurgy Ti and Ti6Al4V alloy.  CORROSION SCIENCE.  88:263-274. 2014
  • Triethylphosphite as a network forming agent enhances in vitro biocompatibility and corrosion protection of hybrid organic-inorganic sol-gel coatings for Ti6Al4V alloys.  Journal of Materials Chemistry B.  2:7955-7963. 2014
  • Adhesion enhancement of powder coatings on galvanised steel by addition of organo-modified silica particles.  PROGRESS IN ORGANIC COATINGS.  77:1309-1315. 2014
  • Optimisation of eco-friendly binary binder system for powder injection moulding.  POWDER METALLURGY.  57:196-203. 2014
  • Enhancing in vitro biocompatibility and corrosion protection of organic-inorganic hybrid sol-gel films with nanocrystalline hydroxyapatite.  Journal of Materials Chemistry B.  2:3886-3896. 2014
  • A cathodic delamination study of coatings with and without mechanical defects.  CORROSION SCIENCE.  82:432-436. 2014
  • Mechanical and functional properties of Invar alloy for mu-MIM.  POWDER METALLURGY.  57:127-136. 2014
  • Water soluble Invar 36 feedstock development for muPIM.  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY.  214:436-444. 2014
  • Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks.  Journal of the European Ceramic Society.  33:3185-3194. 2013
  • Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks.  POLYMER DEGRADATION AND STABILITY.  98:2546-2555. 2013
  • Thermal stability and degradation kinetics of feedstocks for powder injection moulding - A new way to determine optimal solid loading?.  POLYMER DEGRADATION AND STABILITY.  98:1188-1195. 2013
  • Powder injection moulding: processing of small parts of complex shape.  International Journal of Microstructure and Materials Properties.  8:87-96. 2013
  • Torque rheology of zircon feedstocks for powder injection moulding.  Journal of the European Ceramic Society.  32:4063-4072. 2012
  • The design and characterisation of sol-gel coatings for the controlled-release of active molecules.  JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY.  64:442-451. 2012
  • Feedstock development for powder injection moulding of Zirconium Silicate.  Powder injection moulding international.  6:75-78. 2012
  • Effect of conductivity and frequency on detection of heterogeneities in solid/liquid interfaces using local electrochemical impedance Theoretical and experimental study.  ELECTROCHEMISTRY COMMUNICATIONS.  15:5-9. 2012
  • Study of the thermal degradation of bioactive sol-gel coatings for the optimization of its curing process.  JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY.  107:499-508. 2012
  • Preparation of sol-gel hybrid materials from gamma-methacryloxypropyltrimethoxysilane and tetramethyl orthosilicate: study of the hydrolysis and condensation reactions.  COLLOID AND POLYMER SCIENCE.  289:1875-1883. 2011
  • Multifunctional sol-gel derived thin film based on nanocrystaline hydroxyapatite powders.  Journal of Physics: Conference Series (Journal of Physics: Conference Series).  252:1-8. 2010
  • Experimental and Theoretical Methods for Optimal Solids Loading Calculation in MIM Feedstocks Fabricated from Powders with Different Particle Characteristics.  POWDER METALLURGY.  53:34-40. 2010
  • Influence of Particle Size Distribution and Chemical Composition of the Powder on Final Properties of Inconel 718 Fabricated by Metal Injection Moulding (MIM).  Powder injection moulding international.  4:67-70. 2010
  • Fabrication of Bronze Components by Metal Injection Moulding using Powders with Different Particle Characteristics.  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY.  209:5618-5625. 2009
  • Improvement of Rheological Properties of Inconel 718 MIM Feedstock Using Tailored Particle Size Distributions.  POWDER METALLURGY.  51:103-106. 2008

• book chapters 

  • Controlled rate thermal analysis (CRTA) as new method to control the specific surface in hydroxyapatite thin coatings. In: Modern technologies for creating the thin-film systems and coatings.  INTECH. 2017
  • Native oxide films on AZ31 and AZ61 commercial magnesium alloys &- corrosion behaviour, effect on isothermal oxidation and sol&-gel thin film formation. In: New trends in alloy development, characterization and application.  INTECH. 2015

• conference contributions 

  • Effect of Cr addition on the corrosion behaviour of hard materials with Fe-based Co-free binders 2021
  • Powder Injection Molding of Porous MAX Phase Ti3SiC2 2021
  • Electrochemical characterization of coatings for local treatment of fungus infections on titanium-based biomaterials 2019
  • Novel powder metallurgical titanium / sol-gel coating system for local treatment of fungal infections associated with biomaterials 2019
  • A novel antibacterial sol-gel coating for prosthetic devices.  47-47. 2018
  • Staphylococcus aureus adherence decrease on hybrid organo-inorganic sol-gel coating 2018
  • Corrosion and tribocorrosion behavior of Ti-Alumina composites.  28-37. 2016
  • Design and corrosion study of a hybrid organo-inorganic sol-gel coating for biomedical P/M titanium 2016
  • Design and evaluation of PM Ti surfaces modified by colloidal techniques and diffusion processes for biomedical applications.  1-6. 2016
  • Diseño y evaluación de superficies de titanio pulvimetalúrgico modificadas por técnicas coloidales y procesos de difusión para aplicaciones biomédicas 2016
  • Preparation, characterization and electrochemical study of lanthanum-silica sol-gel thin films 2016
  • Sol-gel TiO2 and ZrO2-nanocomposite thin films for enhancing in vitro biocompatibility and bio-corrosion resistance of Ti6Al4V orthopaedic implants 2016
  • Study of the biocompatibility and corrosion resistance of hydroxyapatite sol-gel thin coatings on Ti6Al4V alloy 2016
  • Assessment of the corrosion behaviour of biomedical titanium with a hybrid organoinorganic sol-gel coating modified with a novel copolymer 2015
  • Corrosion behavior of Ti - ceramic composites obtained by combination of colloidal and powder metallurgy techniques 2015
  • Corrosion behavior of Ti and Ti reinforced by addition of ceramic particles obtained by combination of colloidal and powder metallurgy techniques 2015
  • Diseño, síntesis y caracterización de una aleación Al-Cu-Mg pulvimetalúrgica. Relación entre microsestructura y comportamiento frente a la corrosión 2015
  • Electrochemical comparative study of corrosion behavior in physiological conditions of conventional and powder metallurgy titanium alloys 2015
  • Estudio electroquímico comparativo del comportamiento a corrosión en condiciones fisiológicas de aleaciones de titanio pulvimetalúrgicas y convencionales 2015
  • Feedstock optimization for Metal Injection Molding (MIM) of Fe-Si soft magnetic materials 2015
  • Non-VOC water-based nanocomposite sol-gel thin films for corrosion protection of commercial magnesium alloys.  641-641. 2015
  • Nuevo procesamiento Del circón (ZrSiO4) basado en moldeo por inyección de polvos con un ligante ecológico 2015
  • Optimización de feedstocks para el proceso de moldeo por inyección de metales de materiales magnéticos blandos Fe-Si 2015
  • Scanning electrochemical microscopy for the charactirization of sol-gel coatings on AA2024 2015
  • Sintering optimization of Fe-Si soft magnetic materials processed by Metal Injection Molding (MIM) 2015
  • Surface modification of powder metallurgy titanium by colloidal techniques and diffusion processes for biomedical applications 2015
  • Waterborne Sol-gel Coatings Doped with Corrosion Inhibitors for the Protection of Mg-Al Alloys.  349-365. 2015
  • Design, Test and Evaluation of Al-Cu-Mg Powder Metallurgy Alloy. Relation between Microstructure and Corrosion Behavior 2014
  • Development of Fe-based soft magnetic alloys by Metal Injection Molding (MIM) 2014
  • Development of Zircon by Powder Injection Moulding 2014
  • Increase in corrosion resistance of titanium alloys in aeronautical environment by surface treatment 2014
  • Molybdenizing-aluminizing Thermochemical Treatment of Wrought and Powder Metallurgy Ti and Ti6Al4V 2014
  • Obtención de materiales magnéticos blandos fabricados por moldeo por inyección (MIM) para el diseño de imanes 2014
  • Optimización de feedstocks ecológicos basados en circón para moldeo por inyección (CIM) 2014
  • Powder Injection Moulding: a reliable way of processing of small parts of complex shapes 2014
  • Solid loading optimisation of extremely irregular particles 2014
  • ACET and EIS assessment of high performance powder coatings duplex systems 2013
  • Corrosion Protection Studies of Hybrid Sol-Gel Coatings modified by Amine Crosslinker on AA2024-TE: Global and Local Electrochemical Evaluation 2013
  • Effect of debinding and sintering atmospheres of low expansion invar alloy for mu-PIM.  357-362. 2013
  • Feedstock development based on eco-friendly binder system for powder injection moulding.  299-304. 2013
  • Low expansion invar alloy for mu-PIM carbon and oxygen content controlling by sintering atmosphere 2013
  • Mejora de la resistencia frente a la corrosión de aleaciones de titanio en ambiente aeronáutico mediante tratamientos superficiales.  183-193. 2013
  • Optimization of eco-friendly binary binder system for powder injection molding 2013
  • Preparation and characterization of a novel hybrid organic-inorganic sol-gel coating modified by an amine crosslinker 2013
  • Recubrimientos de Hidroxiapatita Nanocristalina: Preparación, Caracterización y Evaluación de la Bioactividad.  108-111. 2013
  • Surface Molybenizing-Aluminzing of wrought and powder metallurgy Ti and Ti6Al4V by halide activated pack cementation 2013
  • Titania-loaded hybrid sol-gel thin films as pretreatments for improving the barrier properties and bioactivity of Ti6Al4V alloy 2013
  • Corrosion Protection Of Powder Metallurgy Al Alloys By Sol-Gel Based Coatings Systems.  447-452. 2012
  • Diseño de nuevos recubrimientos de tipo sol-gel para la protección frente a la corrosión electroquímica de aleaciones pulvimetalúrgicas base aluminio 2012
  • Efecto de la frecuencia de la onda aplicada y de la conductividad del electrólito sobre la detección de heterogeneidades en interfacies sólido/líquido, utilizando la técnica de la espectroscopia electroquímica localizada 2012
  • New Duplex Systems Based on the Use of Silanes and Anticorrosive Pigments of Low Environmental Impact 2012
  • Nuevos tratamientos superficiales desarrollados en el Grupo de Tecnología de Polvos de la UC3M 2012
  • Organic-Inorganic Sol-Gel Coatings Modified with TiO2 Nanoparticles for Corrosion Protection of a Powder Metallurgical Aluminum Alloy 2012
  • Preparación, caracterización y estudio del comportamiento anticorrosivo de recubrimientos órgano-inorgánicos bioactivos aplicados sobre superficies de Ti6Al4V 2012
  • Protección anticorrosiva de aleaciones de magnesio en soluciones acuosas de NaCl 0.6M mediante recubrimientos sol-gel 2012
  • Recubrimientos híbridos órgano-inorgánicos de tipo sol-gel modificados con nanopartículas de TiO2 2012
  • Rheological Characterization of Zircon Powders and Water Soluble Binder Mixtures 2012
  • Rheological Characterization of Zirconium Silicate Feedstocks Based on Water Soluble Binder.  67-72. 2012
  • Corrosion Performance of Epoxy Coatings Modified with Nanocapsules Loaded with Corrosion Inhibitors on AA2024 2011
  • Corrosion Protection Studies of Sol-Gel Thin Films on Magnesium Alloys in NaCl Aqueous Solutions 2011
  • Development of Bioactive Corrosion Resistant Organic-Inorganic Hybrid Sol-Gel Coatings on Ti6Al4V 2011
  • Development of Polyester Coating Using Branched Polymers and Silanes 2011
  • Feedstock Development for Powder Injection Molding of Zirconium Silicate.  111-116. 2011
  • Powder Injection Moulding: Processing of Small Parts of Complex Shape 2011
  • Preparation, Characterization and Study of Corrosion Behaviour of Bioactive Organic-Inorganic Coatings on Ti6Al4V Surfaces 2011
  • Sol-Gel Derived Hybrid Materials Based on Gamma-Methacryloxypropyltrimethoxysilane and Tetramethyl Orthosilicate: Kinetic Studies 2011
  • The Use of Fluorescent Probes for Monitoring the Water Absorption in Corrosion Protection Sol-Gel Coatings 2011
  • Boronizado de Ti y Ti-6Al-4V pulvimetalúrgicos y comparación con boronizado de sustratos Ti-6Al-4V convencionales.  241-250. 2010
  • Fabrication of Glass Components by Powder Injection Moulding (PIM) Recycling Glass Water.  635-642. 2010
  • Rheological Behaviour of Powder Injection Moulding (PIM) Feedstocks Fabricated with a Thermoplastic Binder System Based on Polysaccharides.  549-556. 2010
  • Rheological and Thermal Behavior of Powder Injection Moulding (PIM) Feedstocks fabricated with Binder Systems based on Waxes.  549-556. 2010
  • Sol-gel derived nanocrystalline hydroxyapatite coatings preparation, characterization, evaluation of the bioactivity and corrosion protection behavior. 2010
  • Comparison of Boride Coatings Obtained by Pack Cementation on Powder Metallurgy and Wrought Ti and Ti-6Al-4V.  381-386. 2009
  • Influence of Particle Size Distribution and Chemical Composition of the Powder on Final Properties of Inconel 718 fabricated by Metal Injection Moulding (MIM).  15-20. 2009
  • Comparative Behavior of Bronze and Superalloy Feedstocks Made with Different Particle Sizes.  248-256. 2008
  • Comparative Behaviour of Bronze and Superalloy Feedstocks Made with Different Particles Sizes 2008
  • Oxidation and Tribological Behaviour of an Fe-based MMC Reinforced with TiCN Particles 2008
  • Propiedades mecánicas y resistencia a corrosión de una aleación pulvimetalúrgica base Al-Cu-Mg en función del tratamiento térmico.  223-232. 2008
  • Proyecto Leonardo: Desing for PM "Una experiencia de enseñanza a distancia en el area de materiales (Pulvimetalúrgia)" 2008