sample of publications

• articles 

  • Effect of Y2O3 addition on the microstructure and mechanical properties of an Al1.8CoCrCu0.5FeNi BCC HEA.  Journal of Alloys and Compounds.  960:1-13. 2023
  • Coupled effect of microstructure and topology on the mechanical behavior of Inconel718 additively manufactured lattices.  MATERIALS & DESIGN.  224. 2022
  • Impact of powder reusability on batch repeatability of Ti6Al4V ELI for PBF-LB industrial production.  POWDER METALLURGY.  2022
  • The effect of composition and microstructure on the creep behaviour of 14 Cr ODS steels consolidated by SPS.  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  849:1-8. 2022
  • The effect of temperature on the high-strain-rate response of Co-Al-W- base alloys: Experiments and modeling.  Journal of Alloys and Compounds.  897:163154-163163. 2022
  • Microstructure stability and hardening determination through heat treatment of sintered Co gamma/gamma" based alloys.  POWDER METALLURGY.  65:242-252. 2021
  • Precipitation-induced transition in the mechanical behavior of 3D printed Inconel 718 bcc lattices.  SCRIPTA MATERIALIA.  203:1-5. 2021
  • Design and production of a new feconicralcu high-entropy alloy: Influence of powder production method on sintering.  Materials.  14:4342-4359. 2021
  • Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y-Ti-Al-Zr) addition processed by Spark Plasma Sintering (SPS).  Nuclear Engineering and Technology.  53:2582-2590. 2021
  • Microstructure evolution in a fast and ultrafast sintered non-equiatomic Al/Cu HEA.  Metals.  11:1-16. 2021
  • New Opportunities for Low Alloy Steels-Master Alloys for Liquid Phase Sintering.  Metals.  11:176. 2021
  • Effects of powder reuse on the microstructure and mechanical behaviour of Al-Mg-Sc-Zr alloy processed by laser powder bed fusion (LPBF).  Additive Manufacturing.  36:1-13. 2020
  • Development of New 14 Cr ODS Steels by Using New Oxides Formers and B as an Inhibitor of the Grain Growth.  Metals.  10:1344. 2020
  • High Entropy Alloys Manufactured by Additive Manufacturing.  Metals.  10:639. 2020
  • Effect of small variations in Zr content on the microstructure and properties of ferritic ODS steels consolidated by SPS.  Metals.  10:1-13. 2020
  • Measuring the spreadability of pre-treated and moisturized powders for laser powder bed fusion.  Additive Manufacturing.  32. 2020
  • Effect of the heating rate on the microstructure of a ferritic ODS steel with four oxide formers (Y-Ti-Al-Zr) consolidated by spark plasma sintering (SPS).  Journal of Nuclear Materials.  518:190-201. 2019
  • Novel multiuse liquid phase promoter for PM components.  JOURNAL OF THE AMERICAN CERAMIC SOCIETY.  102:5691-5698. 2019
  • Revealing the effects of powder reuse for selective laser melting by powder characterization.  JOM.  71:1062-1072. 2019
  • Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels.  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  740-741:410-419. 2019
  • Microstructure and compression strength of Co-based superalloys hardened by gamma' and carbide precipitation.  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  734:437-444. 2018
  • Microstructural development of Powder Metallurgy Cobalt-based superalloys processed by Field Assisted Sintering Techniques (FAST).  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  724:461-468. 2018
  • Wettability for understanding the behaviour of new filler materials for sinter-brazing.  POWDER METALLURGY.  60:97-104. 2017
  • Editorial.  POWDER METALLURGY.  60:85-85. 2017
  • The base material: A key factor in sinter-brazing.  Metal Powder Report.  72. 2017
  • On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels.  METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE.  47A:5325-5333. 2016
  • On the role of processing parameters in sintered new Co-based (W,Al) alloys.  Journal of Alloys and Compounds.  674:406-412. 2016
  • Master alloys for liquid phase sintering: Some key points for the design.  Metal Powder Report.  71:184-192. 2016
  • Wetting phenomena for liquid Cu and Cu alloys on Fe-base substrate.  ADVANCED POWDER TECHNOLOGY.  27:1027-1035. 2016
  • A new approach to understand the contribution of the microstructure in the fracture behavior of sintered steels.  INTERNATIONAL JOURNAL OF POWDER METALLURGY.  29-35. 2016
  • Liquid phases tailored for introducing oxidation-sensitive elements through the master alloy route.  Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy.  63:172-184. 2016
  • Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements.  POWDER METALLURGY.  59:31-40. 2016
  • New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior.  METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE.  46:1349-1359. 2015
  • Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel.  CARBON.  82:31-38. 2015
  • Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP.  JOURNAL OF THE AMERICAN CERAMIC SOCIETY.  98:3582-3587. 2015
  • Understanding contribution of microstructure to fracture behaviour of sintered steels.  POWDER METALLURGY.  57:357-364. 2014
  • Effect of processing conditions on microstructural features in Mn&-Si sintered steels.  MATERIALS CHARACTERIZATION.  95:105-117. 2014
  • Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels.  MATERIALS SCIENCE AND TECHNOLOGY.  30:1676-1684. 2014
  • Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study.  METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE.  45A:1748-1760. 2014
  • Toward high performance in Powder Metallurgy.  REVISTA DE METALURGIA.  50. 2014
  • Degradation of alumina refractory bricks by sintering Mn low-alloy steels.  Ceramics International.  40:3063-3070. 2014
  • Surface phenomena during the early stages of sintering in steels modified with Fe-Mn-Si-C master alloy.  MATERIALS CHARACTERIZATION.  86:80-91. 2013
  • Development of high performance powder metallurgy steels by high-energy milling.  ADVANCED POWDER TECHNOLOGY.  24. 2013
  • From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels.  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  573:253-256. 2013
  • From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels.  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  573:253-256. 2013
  • Dimensional consistency achieved in high-performance synchronizing hubs = Consistencia dimensional en cubos de sincronización de alto rendimiento.  REVISTA DE METALURGIA.  49:55-64. 2013
  • Microalloying in sintered steels by mechanical alloying: evolution of nanostructure during attrition and thermal stability.  POWDER METALLURGY.  55:287-293. 2012
  • Lean alloys in PM: from design to sintering performance.  POWDER METALLURGY.  55:294-301. 2012
  • Study of high temperature wetting and infiltration for optimising liquid phase sintering in low alloy steels.  POWDER METALLURGY.  55:180-190. 2012
  • Advanced FeCrAl ODS steels for high-temperature structural applications in energy generation systems = Aceros ODS FeCrAl avanzados para aplicaciones estructurales de alta temperatura en sistemas de generación de energía.  REVISTA DE METALURGIA.  48:303-316. 2012
  • Lead-free copper-base alloys for friction components: sinterability and recrystallization.  INTERNATIONAL JOURNAL OF POWDER METALLURGY.  48:29-39. 2012
  • Thermal stability of nanostructured iron powder as a function of amount and nature of reinforcement (Nb or NbC).  REVISTA DE METALURGIA.  47:373-380. 2011
  • Quantification of hardening in Fe-Mn master alloys prepared by a mechanical alloying process via nanoindentation experiments.  JOURNAL OF MATERIALS RESEARCH.  26:1726-1733. 2011
  • Effect of austempering conditions on the microstructure and tensile properties of low alloyed sintered steel.  METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE.  41A:1847-1854. 2010
  • Bonding Evolution with Sintering Temperature in Low Alloyed Steels with Chromium.  SCIENCE OF SINTERING.  41:161-173. 2009
  • Development of Diffusion Alloyed Powders Using Cu-Ni Diffusion Alloyed Partciles on Fe and Fe-Mo Base Materials.  Powder Metallurgy Progress.  9:76-86. 2009
  • High Density Superalloys (Inconel 718) Processing with Advanced PM Techniques.  INTERNATIONAL JOURNAL OF POWDER METALLURGY.  44:35-43. 2008
  • Estudio de la degradación de elementos refractarios de alúmina en la sinterización de aceros modificados con Mn = Study of the Degradation of the Alumina Refractory during the Sintering Process of Steels Modified with Mn.  BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO.  47:305-310. 2008
  • Effect of Copper Infiltration on Fracture Mode in Sintered Steels.  POWDER METALLURGY.  51:176-181. 2008
  • Aceros de baja aleación y alto rendimiento = High Performance Low Alloy Steels: Up-Date.  REVISTA DE METALURGIA.  44:5-12. 2008

• book chapters 

  • Sintering of superalloys: processing and properties. In: Encyclopedia of materials: metals and alloys.  ELSEVIER INC.. 372-382. 2022

• conference contributions 

  • The role of composition and microstructure on creep strength in a Ferritic ODS steel 2021
  • In Situ Thermal Annealing Transmission Electron Microscopy (TEM) Investigation of an Oxide Dispersion Strengthened ferritic stainless steels (ODS FS) 2019
  • Melt Pool Monitoring For Laser Powder Bed Fusion Process 2019
  • Modifications Of Sintered G-g' Co-based Superalloys (Co-W-Al) By Ti And Ta Additions 2019
  • The Role Of Composition And Microstructure On Creep Strength In A Ferritic ODS Steel 2019
  • Estudio de la evolución microestructural de un acero ferrítico ODS de grupo 4 (Y-Al-Ti-Zr) consolidado por consolidación SPARK Plasma Sintering (SPS).  1-6. 2017
  • Aleaciones base Co sinterizadas para su aplicación en condiciones severas: diseño de microestructuras gamma-gamma' 2016
  • Diseño de nuevas aleaciones para sinter-brazing: cinética de la fase líquida 2016
  • Efecto de la adición del Zr en los precipitados de un acero ferrítico 2016
  • Effect of Zr source on oxide dispersion in ferritic ODS Steel with addition of group 4 elements (Y-Al-Ti-Zr) 2016
  • Microstructural possibilities of Co-Al-W alloys processed by SPS: effects of Al and W contents 2016
  • A new approach to the understand the contribution of the microstructure in the fracture behaviour of sintered steels 2015
  • Aleaciones maestras para introducir nuevos sistemas de aleación en aceros sinterizados 2015
  • Design of a novel Al-alloyed ODS ferritic steel containing zirconium 2015
  • Evaluation of the effect of chemical composition and consolidation procedure on the ductility of ODS alloys 2015
  • La composición del sustrato: un parámetro clave en sinter-brazing 2015
  • New findings on the wettability and spreading of copper on iron base substrates 2015
  • Optimizing liquid phase sintering through the master alloy route: focus on liquid-solid interactions 2015
  • Tailoring master alloys for liquid phase sintering: effect of introducing oxidation-sensitive elements 2015
  • The base material: a key factor in sinter-brazing 2015
  • Vertically aligned carbon nanotube/Carbon film nanostructures for nanoegineered composites 2015
  • Wetting behavior and sinter-brazing 2015
  • Wetting phenomena of Cu-Ni base alloys on Fe base substrates 2015
  • Design and development of MA for liquid phase sintering 2014
  • Development of novel milled Co-base superalloys consolidated by Field-Assisted Hot Pressing.  82. 2014
  • Effect of Zr addition on the microstructure and mechanical properties of an Al-alloyed ODS ferritic steel consolidated by Field-Assisted Hot Pressing (FAHP) 2014
  • In-situ experimental study: a means of improving lean steels performance? 2014
  • In-situ observations during tensile testing of lean steels with different microsturctures.  265. 2014
  • Master alloy compositions for tailoring liquid phases in lean steels 2014
  • New brazer for PM steels 2014
  • Optimizing critical aspects of the sinterabilitiy of lean steels modified with master alloys.  150. 2014
  • Understanding contribution of microstructure to fracture behaviour of sintered steels.  357-364. 2014
  • Development Of High Performance Powder Metallurgy Steels By High Energy Milling.  813-817. 2013
  • Development and microstructural characterization of nanostructured Fe-Cr-Al-W ODS alloys 2013
  • Introduction of Oxidation-Sensitive Elements in Low Alloyed Steels using the Master Alloy Route: Key Aspects for Success.  337-342. 2013
  • Lean steels modified with a new Cu base master alloy: influence of process parameters in dimensional and sintering behavior.  319-324. 2013
  • New alloying systems for PM-steels: opportunities for the Mn-Si master alloys 2013
  • Wettability study of liquid promoters for improved liquid phase sintering process of steels 2013
  • Desarrollo y caracterización de aceros ferríticos ODS (Fe-Cr-Al-W) producidos mediante molienda mecánica y posterior consolidación por spark plasma sintering 2012
  • Desarrollo y caracterización de aceros ferríticos ODS (Fe-Cr-Al-W) 1024x768 Normal 0 false false false EN-US X-NONE X-NONE / producidos mediante aleación mecánica y posterior consolidación mediante spark plasma sintering 2012
  • Development and Characterization Of ODS Ferritic Steels (Fe-Cr-Al-W) Produced By Mechanical Alloying and Consolidated by Spark Plasma Sintering 2012
  • Effect of Liquid Content on Dimensional Stability and Sinter Properties of Liquid-Phase Sintered Low Alloyed Steels 2012
  • Influence of poder particle size on the mechanical properties of PM Low alloyed steels obtained by additions of Cu-Ni-Zn master alloy 2012
  • Interpretación de los factores clave para la sinterización con fase líquida mediante estudios de mojado en el sistema de referencia FeC-Cu 2012
  • Lean Steels in PM through the Use of Mn-Si Master Alloys: Alloy Design and Sintering Performance 2012
  • Liquid Phase Sintering Control Based on Effective Alloying Design 2012
  • Mechanical properties of Mn-Si low Alloy Sintered Steels Prepared Through the Master Alloy Route 2012
  • Optimización de composiciones de aleaciones maestras para la sinterización de aceros pulvimetalúrgicos mediante fase líquida 2012
  • Development of New ODS Ferritic Steels Based on Fe-20Cr-5Al Prealloyed Powders by Mechanical Alloying.  55-60. 2011
  • From Sintered Iron to High Performance PM Steels.  3-11. 2011
  • Lean Alloys: From The Design to the Manufacturing Process 2011
  • Liquid Phase Sintering: Spreading, Wetting and Infiltration Behavior In a Successful Reference System, Fe-C-Cu.  57-62. 2011
  • Microalloying in Sintered Steels by Mechanical Alloying: Evolution of the Nanostructure During Attrition and Thermal Stability 2011
  • Microalloying in Sintered Steels by Mechanical Alloying: Influence of the Alloying Elements Nature on the Grain Size Control and Properties of the Steel.  49-54. 2011
  • Surface Analysis at Different Sintering Stages of Steel Compacts with Mn and Si.  113-118. 2011
  • Aceros sinterizados de baja aleación al Mn: sinterabilidad y tratamientos térmicos.  69-72. 2008
  • Comprehensive Characterization of Mechanical Properties of Heat-Treated Low Alloyed Steels with Mn Added Via Mechanical Alloying.  199-211. 2008
  • Del hierro sinterizado a los aceros pulvimetalúrgicos de altas prestaciones 2008
  • Development of Diffusion-Alloyed Powders using Cu-Ni Diffusion-Alloyed Particles on Fe and Fe-Mo Base Baterials 2008
  • Efecto de las condiciones de temple bainítico (austempering) en las propiedades mecánicas y microestructura de aceros sinterizados.  243-250. 2008
  • Efecto sobre la sinterabilidad de la adición de partículas de FeMn aleadas mecánicamente en aceros de baja aleación 2008
  • Modification of Cr-Mo Low Alloyed Steels by Addition of Mn via Mechanical Milling.  199-202. 2008
  • Optimización de aleaciones de cobre para la fabricación de cojinetes de fricción 2008
  • Proyecto Leonardo: Desing for PM "Una experiencia de enseñanza a distancia en el area de materiales (Pulvimetalúrgia)" 2008