sample of publications

• articles 

  • In situ cross-linking strategy for the synthesis of three-dimensional interconnected polymer/ceramic composite electrolyte.  Polymer.  296:1-12. 2024
  • Advancements in Quasi-Solid-State Li Batteries: A Rigid Hybrid Electrolyte Using LATP Porous Ceramic Membrane and Infiltrated Ionic Liquid.  ACS Applied Energy Materials.  2-12. 2024
  • All-solid-state sodium-ion batteries operating at room temperature based on NASICON-type NaTi2(PO4)3 cathode and ceramic NASICON solid electrolyte: A complete in situ synchrotron X-ray study.  Chemical Engineering Journal.  472:1-13. 2023
  • High-capacity Li4Ti5O12-C thick ceramic electrodes manufactured by powder injection moulding.  Journal of the European Ceramic Society.  44:978-985. 2023
  • 3D-printing of easily recyclable all-ceramic thick LiCoO2 electrodes with enhanced areal capacity for Li-ion batteries using a highly filled thermoplastic filament.  JOURNAL OF COLLOID AND INTERFACE SCIENCE.  642:351-363. 2023
  • Proton conducting sulfonated polysulfone and polyphenylsulfone multiblock copolymers with improved performances for fuel cell applications.  Journal of Industrial and Engineering Chemistry.  122:366-377. 2023
  • Flexible solvent-free polymer electrolytes for solid-state Na batteries.  JOURNAL OF POWER SOURCES.  559:1-9. 2023
  • Using Metal-Organic Framework HKUST-1 for the Preparation of High-Conductive Hybrid Membranes Based on Multiblock Copolymers for Fuel Cells.  Polymers.  15:1-17. 2023
  • Layer shape LiFePO4 obtained by powder extrusion molding as solid boosters for ferro/ferricyanide catholyte in semisolid redox flow battery: Effect of porosity and shape.  Batteries & Supercaps.  5:1-8. 2022
  • Characterization and Modeling of Free Volume and Ionic Conduction in Multiblock Copolymer Proton Exchange Membranes.  Polymers.  14:1688-1708. 2022
  • Development of sodium hybrid quasi-solid electrolytes based on porous NASICON and ionic liquids.  Journal of the European Ceramic Society.  41:7723-7733. 2021
  • Non-woven polyaramid porous membranes as separators for Li-ion batteries?.  ELECTROCHIMICA ACTA.  390:1-11. 2021
  • Interplay between Conductivity, Matrix Relaxations and Composition of Ca-Polyoxyethylene Polymer Electrolytes.  ChemElectroChem.  8:2459-2466. 2021
  • Sulfonated Polysulfone/TiO2(B) Nanowires Composite Membranes as Polymer Electrolytes in Fuel Cells.  Polymers.  13:1-19. 2021
  • New amphiphilic semi-interpenetrating networks based on polysulfone for anion-exchange membrane fuel cells with improved alkaline and mechanical stabilities.  Polymer.  226:1-13. 2021
  • Synthesis and characterization of novel anion exchange membranes based on semi-interpenetrating networks of functionalized polysulfone: Effect of ionic crosslinking.  Polymers.  13:958. 2021
  • On the Conductivity of Proton-Exchange Membranes Based onMultiblock Copolymers of Sulfonated Polysulfoneand Polyphenylsulfone: An Experimental and Modeling Study.  Polymers.  13:1-24. 2021
  • Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries.  Journal of the European Ceramic Society.  41:1025-1032. 2021
  • Opening the door to liquid-free polymer electrolytes for calcium batteries.  ELECTROCHIMICA ACTA.  353:1-11. 2020
  • High mass loading additive-free LiFePO4 cathodes with 500 mum thickness for high areal capacity Li-ion batteries.  JOURNAL OF POWER SOURCES.  458:1-12. 2020
  • Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries.  JOURNAL OF POWER SOURCES.  437:1-5. 2019
  • Multiblock copolymers of sulfonated PSU/PPSU Poly(ether sulfone)s as solid electrolytes for proton exchange membrane fuel cells.  ELECTROCHIMICA ACTA.  302:428-440. 2019
  • Additive-free Li4Ti5O12 thick electrodes for Li-ion batteries with high electrochemical performance.  Journal of Materials Chemistry A.  6:5952-5961. 2018
  • Interplay between humidity, temperature and electrical response of a conductivity sensor based on a La2LiNbO6 double perovskite.  Journal of Materials Chemistry A.  6:5430-5442. 2018
  • Study of the La1/2+1/2xLi1/2-1/2xTi1-xAlxO3 (0 ¿ x ¿ 1) solid solution. A new example of percolative system in fast ion conductors.  Journal of Alloys and Compounds.  720:460-465. 2017
  • DABCO-functionalized polysulfones as anion-exchange membranes for fuel cell applications: Effect of crosslinking.  Journal of Polymer Science, Part B: Polymer Physics.  55:1326-1336. 2017
  • Sodium polymer electrolytes composed of sulfonated polysulfone and macromolecular/molecular solvents for Na-batteries.  ELECTROCHIMICA ACTA.  245:807-813. 2017
  • Synthesis and characterization of sulfonated PEEK-WC-PES copolymers for fuel cell proton exchange membrane application.  EUROPEAN POLYMER JOURNAL.  93:390-402. 2017
  • Aqueous and non-aqueous Li+/H+ ion exchange in Li-0.44/La0.52TiO3 perovskite.  ADVANCED POWDER TECHNOLOGY.  28:514-520. 2017
  • Evaluation of polyolefin-based macroporous separators for high temperature Li-ion batteries.  ELECTROCHIMICA ACTA.  216:68-78. 2016
  • Electrical and magnetic properties of NiZn Ferrite prepared by conventional and solar sintering.  JOURNAL OF THE AMERICAN CERAMIC SOCIETY.  99:2327-2333. 2016
  • Duplex stainless steel self-ligating orthodontic brackets by micro-powder injection moulding.  International journal of engineering research & science.  2:184-193. 2016
  • Development of sodium-conducting polymer electrolytes: comparison between film-casting and films obtained via green processes.  ELECTROCHIMICA ACTA.  192:456-466. 2016
  • High-performance Ni-YSZ thin-walled microtubes for anode-supported solid oxide fuel cells obtained by powder extrusion moulding.  RSC Advances.  6:19007-19015. 2016
  • Porous Ni-YSZ planar anodes by powder extrusion moulding employing PMMA as pore former.  POWDER METALLURGY.  59:281-287. 2016
  • Synthesis and characterization of benzimidazolium-functionalized polysulfones as anion-exchange membranes.  JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY.  53:2363-2373. 2015
  • Synthesis and characterization of novel hybrid polysulfone/silica membranes doped with phosphomolybdic acid for fuel cell applications.  JOURNAL OF MEMBRANE SCIENCE.  492:371-379. 2015
  • Preparation and characterization of ammonium-functionalized polysulfone/Al2O3 composite membranes.  JOURNAL OF MATERIALS SCIENCE.  50:5893-5903. 2015
  • Electrochemical and structural characterization of sulfonated polysulfone.  POLYMER TESTING.  45:185-193. 2015
  • Synthesis and characterization of new membranes based on sulfonated polysulfone/Zn,Al-heptamolibdate LDH.  MATERIALS LETTERS.  152:125-127. 2015
  • Study of the densification, mechanical and magnetic properties of Ni-Zn ferrites sintered in a solar furnace.  Ceramics International.  41:6534-6541. 2015
  • Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials.  Renewable Energy.  68:140-145. 2014
  • Design of industrially scalable microtubular solid oxide fuel cells based on an extruded support.  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY.  39:5470-5476. 2014
  • Microstructural study of duplex stainless steels obtained by powder injection molding.  Journal of Alloys and Compounds.  589:314-321. 2014
  • Synthesis and characterization of polysulfone/layered double hydroxides nanocomposite membranes for fuel cell application.  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY.  39:4016-4022. 2014
  • Characterization of 430L porous supports obtained by powder extrusion moulding for their application in solid oxide fuel cells.  MATERIALS CHARACTERIZATION.  86:108-115. 2013
  • Critical Issues in Manufacturing Dental Brackets by Powder Injection Molding.  INTERNATIONAL JOURNAL OF POWDER METALLURGY.  48:23-29. 2012
  • Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by powder injection moulding powder technology.  POWDER TECHNOLOGY.  210:29-35. 2011
  • Production of alumina microparts by powder injection molding.  International Journal of Applied Ceramic Technology.  8:617-626. 2011
  • Powder injection moulding of premixed ferritic and austenitic stainless steel powders.  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.  528:3480-3488. 2011
  • Powder extrusion moulding of 430L stainless steel thin tubes for porous metal supported SOFCs.  POWDER METALLURGY.  54:103-107. 2011
  • Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks.  POWDER TECHNOLOGY.  200:30-36. 2010
  • Application of powder injection moulding and extrusion process to manufacturing of Ni-YSZ anodes.  Journal of Achievements in Materials and Manufacturing Engineering.  36:87-94. 2009
  • Characterisation of alumina feedstock with polyacetal and wax-polymer binder systems for micro powder injection moulding.  Powder injection moulding international.  3:64-70. 2009
  • Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes.  Ceramics International.  35:2329-2335. 2009
  • Optimization of the processing of 8-YSZ powder by powder injection molding for SOFC electrolytes.  International Journal of Applied Ceramic Technology.  5:574-581. 2008
  • Production of alumina parts by powder injection molding with a binder system based on high density polyethylene.  Journal of the European Ceramic Society.  28:763-771. 2008

• conference contributions 

  • Manufacture of LiFePO4 electrodes for lithium-ion batteries by 3D.  72-73. 2022
  • Novel biphasic multiblock copolymers for fuel cells: a new strategy to prepare proton exchange membranes for clean energy generation.  58-59. 2022
  • Using metalorganic framework MIL-88a for green energy technologies.  70-71. 2022
  • Self-supported and binder-free LFP/C thick electrodes produced by Powder Extrusion Molding 2019
  • Study of the effect of composition and synthesis conditions on the properties of solid-state electrolytes based on Na beta-Al2O3 2019
  • Study of liquids electrolytes in an extended temperature range 2017
  • Development and characterization of calcium conducting polymer electrolytes for the attainment of solvent-free batteries 2016
  • Electrochemical performances of SPSU/Zn,Al-heptamolibdate LDH hybrid membranes for proton exchange membrane fuel cells 2016
  • From lithium to post-lithium batteries: Na & Ca-conducting solvent-free polymer electrolytes.  99-99. 2016
  • Porous 430L supports for solid oxide fuel cells applications produced by powder extrusion moulding employing PMMA and corn starch as pore formers 2016
  • Solvent-free polymer electrolytes based in sodium salts towards the development and characterization of post Li-ion batteries 2016
  • Synthesis and characterization of DABCO-functionalized polysulfones as anion-exchange membranes for fuel cells applications.  55-55. 2016
  • Síntesis y caracterización de membranas de intercambio aniónico para su aplicación como electrolitos en pilas de combustible: efecto del grado de entrecruzamiento 2016
  • Development of polymer electrolyte membranes based on blends of sulfonated polysulfone (SPSU-Na) and macromolecular polymers for solid-state battery applications 2015
  • Polymer electrolytes based on POE and Na-TFS salt for all-solid-state batteries.  72-79. 2015
  • Production of duplex stainless steel self-ligating orthodontic brackets by micro-powder injection moulding 2015
  • Substituent influence on polymeric anion exchange membranes for alkaline fuel cell applications 2015
  • Surface modification of a duplex stainless steel for plastic-metal hybrid parts.  86-93. 2015
  • Surface treatments in duplex stainless steels for their application in hybrid orthodontic brackets 2015
  • Synthesis and characterization of anion-exchange membranes with various functional groups.  16-25. 2015
  • Synthesis and characterization of hybrid sulfonated polysulfone/TiO2(B) nanowires membranes for their application in fuel cells 2015
  • Thermomechanical characterizations of commercial macroporous separators in view of their utilization, up to 120°C 2015
  • A comparison of La0.8Sr0.2MnO3-delta, La0.6Sr0.4Co0.2Fe0.8O3-delta and Pr2NiO4+delta cathodes on the performance of anode supported microtubular cells.  101-101. 2014
  • Caracterización de tubos porosos de Ni-YXZ obtenidos mediante extrusión empleando grafito como agente formador de poros para su aplicación en pilas de combustible de óxido sólido 2014
  • Caracterización microestructural de aceros inoxidables dúplex obtenidos por PIM 2014
  • Estudio de la conductividad protónica en nuevos composites basados en membranas de polisulfona sulfonada cargadas con Zn, Al-heptamolibdato LDH 2014
  • Estudio electroquímico de membranas de polisulfona sulfonada para su aplicación en pilas de combustible 2014
  • Modificación de membranas de polisulfona para su potencial aplicación en pilas de combustile. Efectos de la adición de Al2O3 2014
  • Preparación y caracterización de membranas de polisulfona sulfonada/SiO2 y polisulfona sulfonada/SiO2/heteropoliácido 2014
  • Synthesis and characterization of new membranes based in sulfonated polydulfone/Zn, Al-hepamolibdate LDH 2014
  • Synthesis and characterization of quaternary ammonia polysulfone nanocomposite membranes for H2/O2 alkaline fuel cell applications: An electrochemical study 2014
  • Síntesis de membranas alcalinas basadas en polisulfona funcionalizada con grupos bencimidazolio para su aplicación en pilas de combustible 2014
  • Síntesis y caracterización de membranas de intercambio aniónico basadas en polisulfona funcionalizada con aminas terciarias 2014
  • Caracterización de membranas poliméricas de polisulfona sulfonada cargada con nanopartículas de un hidróxido doble laminar (LDH). Estudio de sus prestaciones eléctricas en una monocelda PEM 2013
  • Fabrication of Ni-YSZ tubes by powder extrusion moulding for SOFC electrolytes 2013
  • Li+/H+ Exchange reactions in La0,52Li0,44TiO3 2013
  • Microtubular SOFC base on an extruded support 2013
  • Synthesis and characterization of PEEK-PES-WC copolymers for fuel cell proton exchange membrane application 2013
  • EBSD Characterization of Phase Transformations in Sintered Duplex Stainless Steels 2012
  • Nanocomposites Polisulfona / Zn,Al-LDHs para membranas de intercambio protónico 2012
  • Obtención y caracterización de películas densas de polisulfona sulfonada para su aplicación como electrolitos en pilas de combustible poliméricas 2012
  • Preparación y caracterización de membranas de polisulfona sulfonada por dos vías para su aplicación en pilas de combustible poliméricas 2012
  • Síntesis y caracterización de membranas nanocomposites de polisulfona e hidróxidos dobles laminares para su utilización en pilas de combustible poliméricas 2012
  • Síntesis y caracterización de membranas de polisulfona para su aplicación en pilas de combustible 2011
  • Influencia de las condiciones de procesado en las propiedades mecánicas y magnéticas de ferritas Ni-Zn fabricadas mediante moldeo por inyección de polvos.  75-80. 2009
  • Caracterización de mezclas de polietileno de alta densidad con ceras mediante la técnica de Autonucleación y Recocidos Sucesivos (SSA) 2008
  • Fabricación de tubos de acero inoxidable 430L mediante moldeo por extrusión de polvos 2008
  • Fabrication of Thin-Walled YSZ Tubular Electrolytes for Fuel Cells by Powder Extrusion Molding.  18-27. 2008
  • Influence of powder particle size distribution on rheological properties of 316L powder injection moulding feedstocks.  257-270. 2008
  • Microstructure, Magnetic and Mechanical Properties of Ni-Zn Ferrites Prepared by Powder Injection Moulding.  7-17. 2008
  • Propiedades mecánicas de Ferritas Ni-Zn fabricadas mediante moldeo por inyección de polvos (PIM) 2008