sample of publications

• articles 

  • Powder organic coatings functionalized with calcium ion-exchanged sikica corrosion inhibitors.  SURFACE & COATINGS TECHNOLOGY.  477:130377. 2024
  • Influence of the early-age length change of alkali-activated slag mortars on the corrosion of embedded steel.  Journal of Sustainable Cement-Based Materials.  178-195. 2023
  • Licorice (Glycirrizha Glabra) as corrosion inhibitor of carbon steel reinforcing bars in mortar and its synergestic effect with nitrite.  Journal of Industrial and Engineering Chemistry.  129:620-633. 2023
  • Surface Caharacterization and electrochemical behaviour of AISI 316L stainless steel machined with green supercritical CO2 coolant.  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE.  2023
  • Carbonation of alkali-activated and hybrid mortars manufactured from slag: confocal Raman microscopy and impact on wear performance= Carbonatación de morteros de escoria activados alcalinamente e híbridos: estudio mediante microscopía Raman Confocal y la repercusión en las prestaciones de desgaste.  BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO.  62:428-442. 2023
  • Evaluation of the Bioaccumulation Capacity of Buddleja Species in Soils Contaminated with Total Chromium in Tannery Effluents in Arequipa (Peru).  Sustainability.  15:1-12. 2023
  • Mineralogical and microstructural changes in alkali-activated and hybrid materials exposed to accelerated leaching.  Journal of Building Engineering.  64:1-16. 2023
  • Magnetic cork particles as reinforcement in an epoxy resin: effect of size and amount on thermal properties.  JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY.  148:1981-1995. 2023
  • The effect of additions of anticorrosive pigments on the cathodic delamitation and wear resistance of an epoxy powder coating.  PROGRESS IN ORGANIC COATINGS.  173:1-12. 2022
  • Study of geopolymer composites based on volcanic ash, fly ash, pozzolan, metakaolin and mining tailing.  Buildings.  12:1-12. 2022
  • Green corrosion inhibition for carbon steel reinforcement in chloride-polluted simulated concrete pore solution using Urtica Dioica extract.  Journal of Building Engineering.  58:1-17. 2022
  • Chloride-induced corrosion of steel reinforcement in mortars manufactured with alternative environmentally-friendly binders.  CEMENT & CONCRETE COMPOSITES.  130:1-14. 2022
  • Use of licorice plant extract for controlling corrosion of steel rebar in chloride-polluted concrete pore solution.  JOURNAL OF MOLECULAR LIQUIDS.  346:1-15. 2022
  • Hybrid cements: towards their use as alternative and durable materials against wear.  Construction and Building Materials.  312:1-10. 2021
  • Hindering the decrease in wear resistance of UV-exposed epoxy powder coatings by adding nano-SiO2 through ball milling.  WEAR.  480-481:1-10. 2021
  • One-Step Enameling and Sintering of Low-Carbon Steels.  Metals.  11:1-19. 2021
  • Mechanical properties and fire-resistance of composites with marble particles.  Journal of Materials Research and Technology-JMR&T.  12:1403-1407. 2021
  • Performance of ultraviolet exposed epoxy powder coatings functionalized with silica by hot mixing.  Journal of Materials Research and Technology-JMR&T.  10:1042-1057. 2021
  • Eco-efficient hybrid cements: pozzolanic, mechanical and abrasion properties.  Applied Sciences-Basel.  10:8696. 2020
  • Corrosion Protection in Chloride Environments of Nanosilica Containing Epoxy Powder Coatings with Defects.  JOURNAL OF THE ELECTROCHEMICAL SOCIETY.  167. 2020
  • Thermal characterization and diffusivity of two mono-component epoxies for transformer insulation.  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES.  103:1-9. 2020
  • Manufacturing and characterization of coatings from polyamide powders functionalized with nanosilica.  Polymers.  12:1-20. 2020
  • Wear behavior in pastes of alkali-activated materials: influence of precursor and alkali solution.  Tribology International.  147:1-10. 2020
  • Functionalizing organic powder coatings with nanoparticles through ball milling for wear applications.  APPLIED SURFACE SCIENCE.  513:1-20. 2020
  • Coating cork particles with iron oxide: effect on magnetic properties.  WOOD SCIENCE AND TECHNOLOGY.  54:869-889. 2020
  • Epoxy powder coatings hot mixed with nanoparticles to improve their abrasive wear.  WEAR.  448-449:1-10. 2020
  • Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides.  Construction and Building Materials.  229:1-11. 2019
  • Effect of silica nanoparticles on the curing kinetics and erosion wear of an epoxy powder coating.  Journal of Materials Research and Technology-JMR&T.  9:455-464. 2019
  • Influence of the alkaline reserve of Chloride-contaminated mortars on the 6-Year corrosion behavior of corrugated UNS S32304 and S32001 stainless steels.  Metals.  9:1-19. 2019
  • Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces.  Journal of Materials Research and Technology-JMR&T.  8:1335-1346. 2019
  • Development of superhydrophobic coatings on AISI 304 austenitic stainless steel with different surface pretreatments.  Thin Solid Films.  671:22-30. 2019
  • Non-Destructive Electrochemical Testing for Stainless-Steel Components with Complex Geometry Using Innovative Gel Electrolytes.  Metals.  8. 2018
  • Role of beta-stabilizing elements on the microstructure and mechanical properties evolution of modified PM Ti surfaces designed for biomedical applications.  POWDER METALLURGY.  61:90-99. 2018
  • Effect of atmospheric plasma torch on ballistic woven aramid.  TEXTILE RESEARCH JOURNAL.  87:2358-2367. 2017
  • Design of gel electrolytes for electrochemical studies on metal surfaces with complex geometry.  ELECTROCHIMICA ACTA.  220:20-28. 2016
  • Welded, pickled stainless steel reinforcements: corrosion results after 9 years in mortar.  MAGAZINE OF CONCRETE RESEARCH.  68:1099-1109. 2016
  • Experimental method for the determination of material parameters of plasticity models for toughened adhesives.  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES.  68:182-187. 2016
  • Silane pretreatment of electrogalvanized steels: effect on adhesive properties.  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES.  65:54-62. 2016
  • Welded, sandblasted, stainless steel corrugated bars in non-carbonated and carbonated mortars: a 9-year corrosion study.  CORROSION SCIENCE.  102:363-372. 2016
  • Evaluation of adhesion improvement of a GFRP treated with atmospheric plasma torch.  JOURNAL OF ADHESION.  91:937-949. 2015
  • Corrugated stainless steels embedded in carbonated mortars with and without chlorides: 9-year corrosion results.  Construction and Building Materials.  95:186-196. 2015
  • Corrugated stainless steels embedded in mortar for 9 years: corrosion results of non-carbonated, chloride-contaminated samples.  Construction and Building Materials.  93:350-359. 2015
  • Selective corrosion of duplex stainless steel bars in acid Part 1: Effect of the composition, microstructure and anodic polarizations.  MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION.  66:347-356. 2015
  • Selective corrosion of duplex stainless steel bars in acid. Part 2: Effect of the surface strain and numerical analysis.  MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION.  66:357-365. 2015
  • Cavitation resistance of epoxy-based multilayer coatings: Surface damage and crack growth kinetics during the incubation stage.  WEAR.  316:124-132. 2014
  • Microstructural influence on corrosion properties of aluminium composites reinforced with amorphous iron borides.  MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION.  65:678-684. 2014
  • Atmospheric plasma torch treatment of polyethylene/boron composites: Effect on thermal stability.  SURFACE & COATINGS TECHNOLOGY.  239:70-77. 2014
  • Atmospheric plasma torch treatment of aluminium: improving wettability with silanes.  APPLIED SURFACE SCIENCE.  287:236-269. 2013
  • Oxidation of Micro-Sized Aluminium Particles: Hollow Alumina Spheres.  OXIDATION OF METALS.  80:403-422. 2013
  • Modification of glass surfaces adhesion properties by atmospheric pressure plasma torch.  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES.  44:1-8. 2013
  • Influence of process parameters on the corrosion resistance of corrugated austenitic and duplex stainless steels.  Materiali in Tehnologije.  47:317-321. 2013
  • Influence of strain-induced martensite in the anodic dissolution of austenitic stainless steels in acid medium.  CORROSION SCIENCE.  69:130-138. 2013
  • Aging and thermal behavior of a PVA/Al microspheres slurry for aluminizing purposes.  MATERIALS CHEMISTRY AND PHYSICS.  134:360-365. 2012
  • Influence of the forming process of corrugated stainless steels on their corrosion behaviour in simulated pore solutions.  CORROSION SCIENCE.  58:52-61. 2012
  • Effect of Moisture and Temperature on the Mechanical Properties of an Epoxy Reinforced with Boron Carbide.  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY.  25:2445-2460. 2012
  • Environmental Evaluation of Silanes as Adhesion Promoters for Organic Coatings.  JOURNAL OF ADHESION.  88:308-320. 2012
  • Epoxy Composite Reinforced with Nano and Micro SiC Particles: Curing Kinetics and Mechanical Properties.  JOURNAL OF ADHESION.  88:418-434. 2012
  • Influence of thread geometry on the performance of retaining anaerobic adhesives.  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES.  31:429-433. 2011
  • Effect of high frequency cathodic pulses on steel embedded in mortar: short and medium term tests.  CORROSION ENGINEERING SCIENCE AND TECHNOLOGY.  46:493-498. 2011
  • Corrosion behaviour of corrugated lean duplex stainless steels in simulated concrete pore solutions.  CORROSION SCIENCE.  53:1748-1755. 2011
  • Mechanical properties of polyester films painted after silanization of 6063 aluminium alloy with different pretreatment conditions.  PROGRESS IN ORGANIC COATINGS.  70:287-292. 2011
  • Milling Process of Petroleum Coke for Sintered Steel Applications.  POWDER METALLURGY.  54:59-66. 2011
  • Estudio mediante AFM de la corrosión de aceros en disoluciones de fase acuosa del hormigón = AFM study of steel corrosion in aqueous solutions in concrete.  MATERIALES DE CONSTRUCCION.  61:27-37. 2011
  • Hydrolysis study of bis-1,2-(triethoxysilyl)ethane silane by NMR.  COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS.  369:53-56. 2010
  • Structural and Mechanical Characterization of gamma-Methacryloxypropyltrimethoxysilane (MPS) on Zn-Electrocoated Steel.  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY.  24:1885-1901. 2010
  • Study through Potentiodynamic Techniques of the Corrosion Resistance of Different Aluminium base MMC's with Boron Additions.  Materials Science Forum (Materials Science Forum).  660-661:203-208. 2010
  • The Influence of pH on the Hydrolysis Process of gamma-Methacryloxypropyltrimethoxysilane, Analyzed by FT-IR, and the Silanization of Electrogalvanized Steel.  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY.  24:1131-1143. 2010
  • Study by XPS of an Atmospheric Plasma-Torch Treated Glass: Influence on Adhesion.  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY.  24:1841-1854. 2010
  • Optimization of the Design of a Double-Cup Specimen Using the Finite Element Method for Testing Adhesive Bonds Under Tensile Loads.  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY.  23:1357-1368. 2009
  • High-Temperature Oxidation and Aqueous Corrosion Performance of Ferritic, Vacuum-Sintered Stainless Steels Prealloyed with Si.  CORROSION SCIENCE.  51:21-27. 2009
  • Changes in the Passive Layer of Corrugated Austenitic Stainless Steel of Low Nickel Content due to the Exposure to Simulated Pore Solutions.  CORROSION SCIENCE.  51:785-792. 2009
  • Aqueous Corrosion Behaviour of Sintered Stainless Steels Manufactured from Mixes of Gas Atomized and Water Atomized Powders.  CORROSION SCIENCE.  51:1651-1657. 2009
  • Friction of PM Ferritic Stainless Steels at Temperatures up to 300º C.  Tribology International.  42:1199-1205. 2009
  • Effect of Boron Carbide Filler on the Curing and Mechanical Properties of an Epoxy Resin.  JOURNAL OF ADHESION.  85:216-238. 2009
  • Effect of the Si Additions on the Mechanical Behaviour and High-Temperature Performance of Hydrogen Sintered 434L Stainless Steels.  Defect and Diffusion Forum.  195-202. 2009
  • Influence of the Processing Parameters on the Nature of Oxides Formed on Sintered Stainless Steels during High-Temperature Exposures.  Defect and Diffusion Forum.  289-282:485-492. 2009
  • Influencia del post-curado en las propiedades mecánicas de una resina epoxi reforzada con SiC: estudio estadístico.  Revista Iberoamericana de Polimeros.  10:153-160. 2009
  • Effect of Welding on Local Mechanical Properties of Stainless Steels for Concrete Structures Using Universal Hardness Tests.  Construction and Building Materials.  23:1883-1891. 2009
  • Analysis of Hydrolysis Process of y-methacryloxypropyltrimethoxysilane and its Influence on the Formation of Silane Coatings on 6063 Aluminum Alloy.  APPLIED SURFACE SCIENCE.  255:6386-6390. 2009
  • Analytical Solution to Calculate the Stress Distribution in Pin-and-Collar Samples Bonded with Anaerobic Adhesives (Following ISO 10123 Standard).  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES.  28:405-410. 2008
  • Oxidation Behavior of Highly Porous Metallic Components.  OXIDATION OF METALS.  70:267-286. 2008
  • Fabricación de soportes anódicos metálicos para SOFC por vía pulvimetalúrgica = Manufacturing of Metallic Anodic Supports for SOFC by Powder Metallurgy.  REVISTA DE METALURGIA.  44:406-417. 2008

• book chapters 

  • Comportamiento frente a la corrosión de corrugados dúplex de baja aleación en disoluciones simuladas de poros de hormigón. In: Armaduras de acero inoxidable.  CEDINOX. 81-90. 2013
  • Influencia del corrugado en la durabilidad de las barras austeníticas en medios sin carbonatar y con cloruros. In: Armaduras de acero inoxidable.  CEDINOX (Centro para la Investigación y el Desarrollo del Acero Inoxidable). 105-114. 2013
  • Study of Nanometric Fe/B (50%/50% by wt.) Powder Obtained by Mechanical Alloying. In: Advances in Materials Science Research.  NOVA SCIENCE PUBLISHERS INC. 237-250. 2011

• conference contributions 

  • Influence of the Activating Solution and Aggregates in the Physical and Mechanical Properties of Volcanic Ash Based Geopolymer Mortars.  1-9. 2021
  • Long-term corrosion performance of lean duplex stainless steel corrugated bars in mortar with chlorides: influence of carbonation 2019
  • Oxidation performance of a grain oriented electrical steel 2019
  • Thermal characterization of two mono-component epoxy resins 2019
  • Effect on wear resistance of nanoparticles addition to a powder polyester coating through ball milling.  771-779. 2018
  • Durability of reinforcing stainless steel ribbed bars in carbonated mortars 2015
  • Behaviour of fluids in porous materials.  303-308. 2014
  • Characterization of water based slurries containing aluminium microparticles for coating applications 2014
  • Cold plasma treatment of polymeric matrix composites.  82-83. 2014
  • Corrosion performance of corrugated stainless steels in mortar partially immersed in chloride solution for 8 years.  147-148. 2014
  • Effect of sintering temperature on the formation of intermetallics in Al-Fe-B nanocomposite.  130-134. 2014
  • Fire resistant coatings for polymeric matrix composites.  160-161. 2014
  • Ceramic filled epoxy coatings on plasma activated glass fibre reinforced polymer based composites 2013
  • Ceramic filled epoxy coatings on plasma activated glass fibre reinforced polymer based composites 2013
  • Experimental method for the determination of material parameters of plasticity models for toughened adhesives 2013
  • Experimental method for the determination of material parameters of plasticity models for toughened adhesives 2013
  • Corrosion Performance of Different Stainless Steel Reinforcements Embedded in Mortar After Five Years of Exposure 2012
  • Degradation of the Elastic Adhesive Bonding: Reliability Study Using the Weibull Modulus.  167-169. 2012
  • Evolution of Viscosity in Different Slurries of Aluminium Particles for High Temperature Applications 2012
  • Fire Resistant Coatings for PMCs 2012
  • Influence of Nanoparticles on Curing Kinetics of Epoxy PMCs.  117-119. 2012
  • Influence of Process Parameters on the Corrosion Resistance of Corrugated Austenitic and Duplex Stainless Steels 2012
  • Influence of Process Parameters on the Corrosion Resistance of Corrugated Austenitic and Duplex Stainless Steels 2012
  • New Coatings with Hollow Particles for High Temperature Processes 2012
  • Oxidation Kinetics of Aluminium Microparticles 2012
  • Oxidation Kinetics of Spherical Aluminium Microparticles 2012
  • Thermal Barrier Coatings for Composites Used in Construction 2012
  • Cold Plasma Treatment of Polymeric Matrix Composites.  74-74. 2011
  • Corrosion Behaviour of the Austenite and Ferrite Phases in Duplex Stainless Steels 2011
  • Effect of APTT in the Wettability of Aluminium 2011
  • Effect of Corrugation on Passive Film Behaviour in Low-Alloyed Stainless Steel by Mott-Schottky Approach 2011
  • Effect of Roughness on the Adhesion of Polymeric Materials 2011
  • Environmental Evaluation of Silanes as Adhesion Promoters for Organic Coatings 2011
  • Epoxy Composite Reinforced with Nano and Micro SiC Particles: Curing Kinetics at Room Temperature and Mechanical Properties 2011
  • Estudio del área real en materiales plásticos 2011
  • Influence of Manufacturing Process in Mechanical Properties and Wear of Al Matrix Composites Obtained by Powder Metallurgy 2011
  • Mechanical Milling Process of aPetroleum Coke with Boric Acid for Lithium-Ion Batteries 2011
  • New Protective Coatings from Hollow Particles for Extreme Environments 2011
  • Nodulation: A Powder Metallurgy Technique in Ancient Jewellery 2011
  • Oxidation of Aluminium Particles 2011
  • Evaluation of Adhesion aod Aging ofa Glass Treared with Aurospheric Plasma Torcb 2009
  • Aplicación de la estadística en la caracterización mecánica de uniones adhesivas 2008
  • Corrosion Behaviour of Corrugated Low-Mo Stainless Steel in Simulated Concrete Solutions 2008
  • Effect of the Si Additions on the Mechanical Behaviour and High-Temperature Performance of Hydrogen Sintered 434L Stainless Steels 2008
  • Estudio estadístico de las propiedades mecánicas de un epoxy reforzado con SiC tras el post-curado 2008
  • Influence of particle size and amount of boron carbide added to epoxy resin to improve mechanical resistance 2008
  • Influence of the Processing Parameters on the Nature of Oxides Formed on Sintered Stainless Steels during High-Temperature Exposures 2008
  • Mechanical and Corrosion Performance of High-Density Ferritic Stainless Steels Manufactured by Powder Metallurgy 2008
  • Optimización de las condiciones de aplicación de gamma-metacriloxipropiltrimetroxisilano en aceros electrozincados 2008
  • Optimizing the Design of a Double-Cup Specimen Through Finite Element Methods, for Tensile Tests of Adhesives 2008
  • Simulación de uniones adhesivas con adhesivos anaeróbicos para el cálculo de distribución de tensiones en uniones cilíndricas 2008