Gas gun driven dynamic expansion of 3D-printed AlSi10Mg rings Articles uri icon

publication date

  • October 2023

start page

  • 1

end page

  • 20

issue

  • 104556

volume

  • 180

International Standard Serial Number (ISSN)

  • 0734-743X

Electronic International Standard Serial Number (EISSN)

  • 1879-3509

abstract

  • This paper presents a new experimental setup to study dynamic fragmentation of metallic rings manufactured by 3D-printing technology. The ring is inserted over a ductile thin-walled tube which is impacted axially by a conical-nosed cylindrical projectile fired by a single-stage light–gas gun. The diameter of the projectile is larger than the internal diameter of the thin-walled tube, which expands as the projectile advances, pushing radially outwards the metallic ring, that eventually breaks into multiple fragments. The impact velocities considered in the present experimental campaign range from 197 m/s to 385 m/s. The AlSi10Mg ring specimens are printed by Selective Laser Melting technique, with an inner diameter of 14 mm and square cross section of 2 × 2 mm2. To obtain time-resolved information on the mechanics of fragmentation, the number of fractures, and the size of the fragments, the tests have been recorded with two-high speed cameras. A tunnel-shaped soft casing made of polymer foam is placed around the specimen to softly recover the ejected fragments, that have been weighted and sized to determine the statistics of the fragments size distribution. In addition, the predictions of the fragmentation theory of Kipp and Grady (1985) for the evolution of the number of fragments with the impact velocity have been compared with the experimental evidence, and an excellent quantitative agreement has been found within the whole range of loading rates investigated. Compared to other available techniques for dynamic fragmentation of rings, in which the expansion of the specimen is driven by electromagnetic or explosive loading, this experimental setup stands out for its simplicity, fast operation, quick assembly, and flexibility to test different engineering materials, which facilitates performing extensive experimental campaigns (34 successful tests have been carried out in this research). To the authors’ knowledge, this paper presents the most comprehensive data set to date on the fragmentation of dynamically expanded printed rings, including the first high-resolution video recordings of the formation of multiple cracks throughout the circumference of the samples, and scanning electron microscopy images of the fractures showing the porous microstructure on the cracks surface.

subjects

  • Industrial Engineering
  • Materials science and engineering
  • Mechanical Engineering

keywords

  • ring expansion; high-speed impact; dynamic fragmentation; additively-manufactured metals