publisher of
- Feasibility Of Titanium-based Materials For PEMFC Bipolar Plates Using Powder Metallurgy And Surface Modification Approaches 2022
- Effect of debinding and sintering atmospheres of low expansion invar alloy for mu-PIM. 357-362. 2013
- Analysis of the Temperature Effect on the Lamellar Microstructure Transformation of Gamma-TiAl Intermetallics Processed by Field Assisted Hot Pressing 2012
- Corrosion Protection Of Powder Metallurgy Al Alloys By Sol-Gel Based Coatings Systems. 447-452. 2012
- Effect of Liquid Content on Dimensional Stability and Sinter Properties of Liquid-Phase Sintered Low Alloyed Steels 2012
- Fabrication of Metallic Iron Green Pieces by Colloidal Processing Techniques in Aqueous Media. 417-422. 2012
- Improvement of Sintering Behaviour of Ti by Colloidal Techniques. 35-40. 2012
- Influence of HIP Parameters on the Microstructure and Mechanical Properties of CP Ti and Ti-6Al-7NB Alloy. 17-22. 2012
- Liquid Phase Sintering Control Based on Effective Alloying Design 2012
- Nanosized Nickel Powders Synthesized by a Reduction Method Assisted by Ultrasound. 23-26. 2012
- Oxidation Behavior Of A Fe Matrix Cermet Reinforced With Ti(C,N). Influence Of Heat Treatments. 89-94. 2012
- Rheological Characterization of Zirconium Silicate Feedstocks Based on Water Soluble Binder. 67-72. 2012
- Microstructural Analysis of an Iron-Based Cermet Reinforced with TiCN. 157-163. 2011
- Study of the Influence of the Sintering Tray on the Final Properties of PM Elemental Titanium. 289-294. 2011
- Biomedical Ti-6Al-7Nb Titanium Alloy Produced by P/M Techniques. 805-811. 2010
- Influence of Matrix Composition on the Sinterability and Properties of Fe-Based Cermets Reinforced with TiCN Particles. 457-464. 2010
- Rheological Behaviour of Powder Injection Moulding (PIM) Feedstocks Fabricated with a Thermoplastic Binder System Based on Polysaccharides. 549-556. 2010
- Rheological and Thermal Behavior of Powder Injection Moulding (PIM) Feedstocks fabricated with Binder Systems based on Waxes. 549-556. 2010
- Tin influence during on sintering of prealloyed and premixed Al-Cu powders. 289-296. 2010
- Comparison of Boride Coatings Obtained by Pack Cementation on Powder Metallurgy and Wrought Ti and Ti-6Al-4V. 381-386. 2009
- Effect of Carbon Content on the PM Processing and Properties of FeCr-TiCN Composites. 209-215. 2009
- Influence of Particle Size Distribution and Chemical Composition of the Powder on Final Properties of Inconel 718 fabricated by Metal Injection Moulding (MIM). 15-20. 2009
- Influence of Titanium Powder Features on its Pressing Performance. 229-234. 2009