Thermal analysis of a hybrid high concentrator photovoltaic/membrane distillation system for isolated coastal regions

The present study introduces an innovative method for fresh water and electricity generation in the isolated regions. This proposed system couples a concentrated photovoltaic (CPV) unit with a membrane distillation (MD) unit. The CPV unit converts solar energy into electrical energy with conversion efficiency of about 40%. The rest is converted to thermal energy, which may cause cells degradation if temperature exceeds manufacturer limits. An intermediate fluid is used as a coolant which transfers the excess energy to the feed of the MD unit through a heat exchanger. The generated thermal energy in the HCPV cells is used as the driving force for the distillation phenomena in the MD unit. Numerical models were built to simulate the hybrid system. It was found that, at a solar radiation concentration ratio of 1000 suns, the coolant flow rate should exceed 150 g/min for a maximum cell temperature less than 349 K. This arrangement should produce 177 W electric power, and 308 W thermal heat transferred to the coolant. At these conditions, the feed inlet temperature reaches about 323 K, at which, the MD unit produces about 5.88 kg/m2.h of pure water, thus allowing the system to simultaneously produce electricity and pure water for isolated coastal regions.

Thermal analysis of a hybrid high concentrator photovoltaic/membrane distillation system for isolated coastal regions Articles