Ultra-Wideband Multi-Octave Planar Interconnect for Multi-Band THz Communications Articles uri icon

publication date

  • August 2023

start page

  • 532

end page

  • 550

issue

  • 7-8

volume

  • 44

abstract

  • An ultra-wideband (UWB) interconnect technology using indium phosphide (InP)-based transitions for coupling the output signals from terahertz (THz) photodiodes featuring coplanar waveguide (CPW) outputs to low-loss dielectric rod waveguides (DRWs) is presented. The motivation is to exploit the full bandwidth offered by THz photodiodes without limitations due to standard rectangular waveguide interfaces, e.g., for future high data rate THz communications. Full electromagnetic wave simulations are carried out to optimize the electrical performance of the proposed InP transitions in terms of operational bandwidth and coupling efficiency. The transitions are fabricated on 100-µm-thin InP and integrated with silicon (Si) DRWs. Experimental frequency domain characterizations demonstrate efficient THz signal coupling with a maximum coupling efficiency better than - 2 dB. The measured 3-dB and 6-dB operational bandwidths of 185 GHz and 280 GHz, respectively, prove the multi-octave ultra-wideband features of the developed interconnect technology. The 6-dB operational bandwidth covers all waveguide bands between WR-12 to WR-3, i.e., a frequency range between 60 and 340 GHz. In addition, the multi-octave performances of the fabricated interconnects were successfully exploited in proof-of-concept THz communication experiments. Using intermediate frequency orthogonal frequency division multiplexing (OFDM), THz communications are demonstrated for several frequency bands using the same interconnect. Considering soft-decision forward error correction, error-free transmission with data rates of 24 Gbps at 80 GHz and 8 Gbps at 310 GHz is achieved

subjects

  • Electronics

keywords

  • hybrid integration; interconnect; on-chip communication; terahertz