Outputs for MATERIALS SCIENCE AND ENGINEERING AND CHEMICAL ENGINEERING Department (Year 2021)
|
Articles
- A New Antifungal-Loaded Sol-Gel Can Prevent Candida albicans Prosthetic Joint Infection
- A comparison of field assisted hot pressing and hot isostatic pressing for gas atomized Ti-22Al-26Nb(at.%) and Ti-22Al-26Nb-5B(at.%) powders
- A promising method to develop TiO2-based nanotubular surfaces on Ti-40Nb alloy with enhanced adhesion and improved tribocorrosion resistance
- Automated low-cost device to produce sub-micrometric polymer fibers based on blow spun method
- Carbon Monoliths with Hierarchical Porous Structure for All-Vanadium Redox Flow Batteries
- Carbon footprint and water use of alkali-activated and hybrid cement mortars
- Carbon nanofiber-supported tantalum oxides as durable catalyst for the oxygen evolution reaction in alkaline media
- Characterization of hybrid biocomposite Poly-Butyl-Succinate/Carbon fibers/Flax fibers
- Comparative characterization of hot-pressed polyamide 11 and 12: mechanical, thermal and durability properties
- Composite material with polyurethane-based reactive hot-melt matrix
- Concentration Effect over Thermoresponse Derived from Organometallic Compounds of Functionalized Poly(N-isopropylacrylamide-co-dopamine Methacrylamide)
- Decomposition kinetics and lifetime estimation of natural fiber reinforced composites: Influence of plasma treatment and fiber type
- Design and production of a new feconicralcu high-entropy alloy: Influence of powder production method on sintering
- Development of competitive high-entropy alloys using commodity powders
- Development of sodium hybrid quasi-solid electrolytes based on porous NASICON and ionic liquids
- Effect of BaCO3 reactivity and mixing procedure on sulfate-resistant cement performance
- Effect of Thermal Processing on the Dynamic/Isothermal Crystallization and Cytocompatibility of Polylactic Acid for Biomedical Applications
- Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y-Ti-Al-Zr) addition processed by Spark Plasma Sintering (SPS)
- Effect of the Deposition Time and Heating Temperature on the Structure of Chromium Silicides Synthesized by Pack Cementation Process
- Emerging opportunities of silica-based materials within the food industry
- Halochromic Cellulose Textile Obtained via Dyeing With Biocolorant Isolated From Streptomyces Sp. Strain NP4
- High Stability and Long Cycle Life of Rechargeable Sodium-Ion Battery Using Manganese Oxide Cathode: A Combined Density Functional Theory (DFT) and Experimental Study
- Hindering the decrease in wear resistance of UV-exposed epoxy powder coatings by adding nano-SiO2 through ball milling
- Hybrid cements: towards their use as alternative and durable materials against wear
- Hydrogen bonds in blends of poly(N-isopropylacrylamide), poly(n-ethylacrylamide) homopolymers, and carboxymethyl cellulose
- Improved tribocorrosion behavior on bio-functionalized Beta-type titanium alloy by the pillar effect given by TiN reinforcements
- Improvement of thermal efficiency in cement mortars by using synthetic feldspars
- In-situ electrochemical synthesis of inorganic compounds for materials conservation: Assessment of their effects on the porous structure
- Injection moulding of porous MAX phase Ti3SiC2 without using space-holder
- Interplay between Conductivity, Matrix Relaxations and Composition of Ca-Polyoxyethylene Polymer Electrolytes
- Investigation into the magnetic properties of CoFeNiCryCux alloys
- Ion-Exchanged UPG-1 as Potential Electrolyte for Fuel Cells
- LiFePO4-ferri/ferrocyanide redox targeting aqueous posolyte: Set-up, efficiency and kinetics
- Mechanical properties and fire-resistance of composites with marble particles
- Microstructural details and polymorphs in poly(propylene¿co¿1¿nonene) copolymers synthesized at different polymerization temperatures
- Microstructure evolution in a fast and ultrafast sintered non-equiatomic Al/Cu HEA
- Microstructure stability and hardening determination through heat treatment of sintered Co gamma/gamma" based alloys
- N-methylene phosphonic acid chitosan/graphene sheets decorated with silver nanoparticles as green antimicrobial agents
- New Opportunities for Low Alloy Steels-Master Alloys for Liquid Phase Sintering
- New amphiphilic semi-interpenetrating networks based on polysulfone for anion-exchange membrane fuel cells with improved alkaline and mechanical stabilities
- Non-woven polyaramid porous membranes as separators for Li-ion batteries?
- Novel high entropy alloys as binder in cermets: From design to sintering
- On the Conductivity of Proton-Exchange Membranes Based onMultiblock Copolymers of Sulfonated Polysulfoneand Polyphenylsulfone: An Experimental and Modeling Study
- One-Step Enameling and Sintering of Low-Carbon Steels
- PCL/collagen blends prepared by solution blow spinning as potential materials for skin regeneration
- Performance of ultraviolet exposed epoxy powder coatings functionalized with silica by hot mixing
- Phase diagrams in alternative hard materials: Validation of thermodynamic simulation through high temperature x-ray diffraction, differential thermal analysis and microstructural characterization
- Polymeric materials with antibacterial activity: A review
- Powder metallurgy: A new open section in metals
- Precipitation-induced transition in the mechanical behavior of 3D printed Inconel 718 bcc lattices
- Prediction of phase, hardness and density of high entropy alloys based on their electronic structure and average radius
- Preparation, thermoresponsive behavior, and preliminary biological study of functionalized poly(N-isopropylacrylamide-co-dopamine methacrylamide) copolymers with an organotin(IV) compound
- Processing and properties of long recycled-carbon-fibre reinforced polypropylene
- Recent advances in polymer-metallic composites for food packaging applications
- Recent progress in carbon fiber reinforced polymers recycling: a review of recycling methods and reuse of carbon fibers
- Reduction of Grain Boundary Resistance of La0.5Li0.5TiO3 by the Addition of Organic Polymers
- Reinforcement-matrix interactions and their consequences on the mechanical behavior of basalt fibers-cement composites
- Response of electroless copper coated CFRP laminates to emulated lighting strikes
- Selected Aromatic Plants Extracts as an Antimicrobial and Antioxidant Finish for Cellulose Fabric- Direct Impregnation Method
- Smart flame retardant coating containing carboxymethyl chitosan nanoparticles decorated graphene for obtaining multifunctional textiles
- Spongy nano surface architecture of chemically grown BiVO4: High-capacitance retentive electrochemical supercapacitor
- Study of the synthesis of MAX phase Ti3SiC2 powders by pressureless sintering = Estudio de la síntesis de polvos de la fase MAX Ti3SiC2 por sinterización sin presión
- Sulfonated Polysulfone/TiO2(B) Nanowires Composite Membranes as Polymer Electrolytes in Fuel Cells
- Synthesis and characterization of novel anion exchange membranes based on semi-interpenetrating networks of functionalized polysulfone: Effect of ionic crosslinking
- Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries
- The effect of microstructure and strain rate on the 25 degrees C and 700 degrees C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy
- The electrochemical kinetics of cerium selenide nano-pebbles: The design of a device-grade symmetric configured wide-potential flexible solid-state supercapacitor
- Thermomechanically processed powder metallurgy Ti-5Fe alloy: Effect of microstructure, texture, Fe partitioning and residual porosity on tensile and fatigue behaviour
- Thermophysical properties of porous Ti2AlC and Ti3SiC2 produced by powder metallurgy
- Ti(C,N)-Fe15Ni10Cr cermets as alternative hard materials: Influence of the processing route and composition on their microstructure and properties
- Towards more sustainable building based on modified Portland cements through partial substitution by engineered feldspars
- Understanding the links between the composition-processing-properties in new formulations of heas sintered by sps
- Web-analogues one-dimensional iron hydroxide@cadmium hydroxide nanostructure: electrochemical supercapacitor
- Wettability behavior of solution blow spun polysulfone by controlling morphology
- ZnO Nanoparticles with Controllable Ce Content for Efficient Photocatalytic Degradation of MB Synthesized by Polyol Method
Books
Conference Contributions
- Development Of TiN Coatings On AM Ti-6Al-4V Open Cell Porous Structures For PEMFC Bipolar Plates
- Effect of Cr addition on the corrosion behaviour of hard materials with Fe-based Co-free binders
- Powder Injection Molding of Porous MAX Phase Ti3SiC2
- The role of composition and microstructure on creep strength in a Ferritic ODS steel
Patents
Projects
- "Desarrollo de nuevas baterías de litio de estado sólido y de su sistema electrónico de carga y gestión de la energía para su aplicación a dispositivos biomédicos y aeronaves no tripulados."
- Desarrollo de nuevos nanomateriales optimizados para la mejora de la actividad fotocatalítica
- Powder Metallurgy Approaches for Next-Generation Bipolar Plate Materials - PERMEABLE
- Preparación mediante hilado por soplado y caracterización de materiales termoplásticos biocompatibles multifuncionales constituidos por fibras submicrométricas
- Testing methods and techniques to characterise the mechanical properties ofpolymeric systems used in the coating industry
- The inhibition synergism of some plant extracts and common inorganic inhibitors to enhance the corrosion control of the embedding steel bars in concrete - NATCON
Supervised Theses
- Mechanical integrity of ceramic-metal composite materials: Influence of microstructure and processing route
- Nuevas composiciones de aleaciones de alta entropía: diseño, fabricación y caracterización.
- Nuevas formulaciones de aceros ODS de alto rendimiento
- Nuevos materiales nanocompuestos multifuncionales preparados mediante ''Solution Blow Spinning'' con potenciales propiedades eléctricas especiales
- Nuevos materiales nanocompuestos preparados mediante Solution Blow Spinning con potenciales propiedades inducidas
- Preparation of new polymer nanocomposites with potential use in restorative applications for the consolidation historical wooden works
- Processing and surface modification of beta-Titanium alloys produced by powder metallurgy for biomedical applications
- Sintesis, caracterizacion y desarrollo de nuevos dispositivos u aplicaciones basados en particulas nanoestructuradas híbridas de sistemas semiconductores de oxidos metalicos