Outputs for THERMAL AND FLUIDS ENGINEERING Department (Year 2018)
|
Articles
- 1-D transient numerical modeling of counter-current two-phase stratified flow inside a medium temperature solar linear collector
- A multipurpose reduced mechanism for ethanol combustion
- A novel formulation for unsteady counterflow flames using a thermal-conductivity-weighted coordinate
- Aiming factor to flatten the flux distribution on cylindrical receivers
- Analysis of representative elementary volume and through-plane regional characteristics of carbon-fiber papers: diffusivity, permeability and electrical/thermal conductivity
- Analyzing the pyrolysis kinetics of several microalgae species by various differential and integral isoconversional kinetic methods and the Distributed Activation Energy Model
- Approximate analytical treatment of annular fins of rectangular profile for teaching fin heat transfer: Utilization of the mean value theorem for integrals
- CONDUCTIVE HEATING OF A CONFINED GAS
- Combining the lumped capacitance method and the simplified distributed activation energy model to describe the pyrolysis of thermally small biomass particles
- Critical comparison of electrostatic effects on hydrodynamics and heat transfer in a bubbling fluidized bed with a central jet
- Dripping dynamics and transitions at high Bond numbers
- Dynamic modeling of a particle/supercritical CO2 heat exchanger for transient analysis and control
- Economic and Environmental Considerations for Zero-emission Transport and Thermal Energy Generation on an Energy Autonomous Island
- Fatigue analysis of the steam generator of a parabolic trough solar power plant
- Feasibility study of a new concept of solar external receiver: Variable velocity receiver
- Fly Ash Characterization from Cynaracardunculus L. Gasification
- Gas bubble evolution on microstructured silicon substrates
- Influence of the steam generator on the exergetic and exergoeconomic analysis of solar tower plants
- Interaction of Oblique Shocks and Laminar Shear Layers
- Lateral solids meso-mixing in pseudo-2D fluidized beds by means of TFM simulations
- Leakiness of Pinned Neighboring Surface Nanobubbles Induced by Strong Gas-Surfice Interaction
- Maximizing the power block efficiency of solar tower plants: Dual-pressure level steam generator
- Measurement of laminar burning velocity of ethanol-air mixtures at elevated temperatures
- Modeling and performance analysis of an absorption chiller with a microchannel membrane-based absorber using LiBr-H2O, LiCl-H2O, and LiNO3-NH3
- Multiple combustion regimes and performance of a counter-flow microcombustor with power extraction
- Numerical model of solar external receiver tubes: Influence of mechanical boundary conditions and temperature variation in thermoelastic stresses
- On the critical conditions for pool-fire puffing
- On the role of axial wall conduction in mini/micro counterflow heat exchangers
- One-dimensional modelling of the thinning of particulate suspensions near pinch-off
- Proposing a master's programme on participatory integrated assessment of energy systems to promote energy access and energy efficiency in Southern Africa
- Pyrolysis of Cynara cardunculus L. samples - Effect of operating conditions and bed stage on the evolution of the conversion
- Temporal stability of free liquid threads with surface viscoelasticity
- The impact of vorticity waves on the shock dynamics in core-collapse supernovae
- The nonlinear states of viscous capillary jets confined in the axial direction
- Theoretical study of direct vapor generation for energy integrated solar absorption machines
- Thermo-mechanical modelling of solar central receivers: effect of incident solar flux resolution
- Transient effects in the translation of bubbles insonated with acoustic pulses of finite duration
- Transient thermo-mechanical analysis of steam generators for solar tower plants
- Turbulence Generation by Shock-Acoustic-Wave Interaction in Core-Collapse Supernovae
- Two-phase heat transfer model of a beam-down gas-solid fluidized bed solar particle receiver
Book Chapters
- Fundamentals of electrochemistry with application to direct alcohol fuel cell modeling. In: Proton exchange membrane fuel cell
- Photovoltaic Cooking. In: Advances in Renewable Energies and Power Technologies. Vol.1: Solar and Wind Energies
- Y yo quiero ser..ingeniero en fluidomecánica. In: Ciencia, y yo quiero ser científico!!!
Conference Contributions
- Aiming strategy for molten salt receivers
- Análisis de la eficiencia del receptor con nuevos tubos de geometría elíptica en centrales termosolares tipo torre
- Comparación del comportamiento térmico del flujo de sales y sodio fundido en tubos bayoneta de receptores solares de torre central
-
Comparación
del Comportamiento Térmico del Flujo de Sales y Sodio Fundido en Tubos Bayoneta
de Receptores Solares de Torre Central - Comparison of the heat transfer characteristics of molten salt, liquid sodium and supercritical CO2 in bayonet tubes of solar tower receivers
- Effect of eccentricity on the thermal stresses in a bayonet tube for solar power tower receivers
- Elliptical tubes receivers efficiency analysis in solar power towers
- Enhanced bubble generation by an air-stimulated co-flow system
- Experimental test of tubular external molten salt receivers under non-steady state conditions
- Exploring the limits of macro-homogeneous models of carbon-fiber papers
- Ignición de capas de mezcla supersónica por ondas de choque
- Influencia de los soportes longitudinales en los tubos de los receptores solares térmicos
- Influencia de los soportes longitudinales en los tubos de los receptores solares térmicos
- Integration of a solar linear particle receiver with a gas turbine
- Irregular configurations of shock wave impingement on shear layers
- Mathematical modelling of a membraneless redox flow battery
- Medidas experimentales en un lazo de sales fundidas bajo un flujo de calor no uniforme
- Non-regular configurations in the interaction of oblique shocks with mixing layers
- Photovoltaic solar cooking with thermal energy storage (TES)
- Pore-scale modeling of thin carbon fiber-based gas diffusion layers in polymer electrolyte fuel cells using 3D X-ray computed tomography
- Producción solar directa de aire a media temperatura
- Regimes of bubble suction from a needle submerged in a very viscous liquid
- Satellite-droplet formation regimes in the natural breakup of clean and surfactant-laden liquid threads
- Simulation of the operating characteristics of a H2O/LiBr absorption machine for a real process
- Solar cooker as a public furniture. Thermal modeling
- The shaky life of a water drop in an anise oil-rich environment
- Thermal and mechanical stresses in a solar central receiver
- Thermal stress variation in a solar central receiver during daily operation
Patents
- Absorbedor adiabático para máquina de absorción
- Receptor de torre de energía solar
- Secadero solar
- Sistema óptico de haz descendente lineal solar
Projects
- Desarrollo de máquinas de refrigeración por absorción empleando microintercambiadores, membranas y nanopartículas para la sostenibilidad energética en la edificación
- Dinámica de interfases complejas con aplicaciones al medio ambiente, la generación de energía y nuevos materiales - III
- Diseño y evaluacion de un nuevo receptor solar exterior de tubos ovalados
- Fusion por Confinamiento Inercial: Inestabilidades Hidrodinámicas
- Modelado y diseño de baterias de flujo redox para almacenamiento de energías renovables (REDOXStore)
- PROYECTO SACYR RETOS; HIBRIDACIÓN DE ENERGÍA GEOTÉRMICA CON BATERÍAS DE FLUJO PARA LA CLIMATIZACIÓN DE EDIFICIOS TERCIARIOS DE ENERGÍA CERO
- Producción directa de aire a alta temperatura y a presión turboalimentada en colectores solares de. concentración