Outputs for CONTINUUM MECHANICS AND STRUCTURAL ANALYSIS Department (Year 2018)

Articles

• A continuum mechanics constitutive framework for transverse isotropic soft tissues
• A new constitutive model for polymeric matrices: Application to biomedical materials
• Analysis of impact energy absorption by lightweight aramid structures
• Analysis of low-velocity impact on flax/PLA composites using a strain rate sensitive model
• Analytical models for the perforation of thick and thin thickness woven laminates subjected to high-velocity impact
• Band structure analysis of a thin plate with periodic arrangements of slender beams
• Complete mechanical characterization of an external hexagonal implant connection: in vitro study, 3D FEM, and probabilistic fatigue
• Crack propagation in TRIP assisted steels modeled by crystal plasticity and cohesive zone method
• Evaluation of Fatigue Behavior in Dental Implants from In Vitro Clinical Tests: A Systematic Review
• Experimental analysis of an attenuation method for Hydrodynamic Ram effects
• Experimental analysis of drilling induced damage in biocomposites
• Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs
• Homogenized Gurson-type behavior equations for strain rate sensitive materials
• Identification of an open crack in a beam with variable profile by two resonant frequencies
• Implant Treatment in Atrophic Maxilla by Titanium Hybrid-Plates: A Finite Element Study to Evaluate the Biomechanical Behavior of Plates
• Influence of ply orientation on free-edge effects in laminates subjected to in-plane loads
• Influence of stress state on the mechanical impact and deformation behaviors of aluminum alloys
• Matrix cracking evolution in open-hole laminates subjected to thermo-mechanical loads
• Multi-impact mechanical behaviour of short fibre reinforced composites
• Non-uniform distributions of initial porosity in metallic materials affect the growth rate of necking instabilities in flat tensile samples subjected to dynamic loading
• Nonlinear axisymmetric vibrations of a hyperelastic orthotropic cylinder
• Numerical analysis for design of bioinspired ceramic modular armors for ballistic protections
• Numerical analysis of surface cracks repaired with single and double patches of composites
• Numerical methodology to analyze the ice impact threat: Application to composite structures
• Numerical model of solar external receiver tubes: Influence of mechanical boundary conditions and temperature variation in thermoelastic stresses
• Numerical study of composite fragment impacts onto rigid target
• On the bulk modulus and natural frequency of fullerene and nanotube carbon structures obtained with a beam based method
• Perforation mechanics of 2024 aluminium protective plates subjected to impact by different nose shapes of projectiles
• Propagation of solitons in a two-dimensional nonlinear square lattice
• Random distributions of initial porosity trigger regular necking patterns at high strain rates
• Reproducing the nonlinear dynamic behavior of a structured beam with a generalized continuum model
• The influence of laminate stacking sequence on ballistic limit using a combined Experimental/FEM/Artificial Neural Networks (ANN) methodology

Conference Contributions

• A viscous-hyperelastic constitutive model for transverse isotropic soft tissues
• Análisis del taladrado de material compuesto 100% biodegradable
• Análisis experimental y numérico del material compuesto de aramida frente a impacto balístico
• Análisis numérico de la respuesta de un casco para la desactivación de artefactos explosivos frente a impacto
• Ballistic performance and energy absorption characteristics of lightweight aramid structures
• Compression behaviour of composite laminates using the Serial/Parallel mixing theory
• Dynamic Recrystallization and Adiabatic Shear Localization
• Estudio experimental y numérico de la fricción entre hilos de tejidos de alto rendimiento
• Estudio experimental y numérico de la fricción entre hilos en la respuesta frente a impacto de tejidos de alto rendimiento
• Experimental and Numerical Study of inter-yarn friction coefficient behavior on the ballistic impact response of High-Performance Fabrics
• Experimental and numerical analysis of combat helmet ballistic performance
• Experimental and numerical study of a new structural composite for innovative cars
• Ignición de capas de mezcla supersónica por ondas de choque
• Influencia de los soportes longitudinales en los tubos de los receptores solares térmicos
• Influencia de los soportes longitudinales en los tubos de los receptores solares térmicos
• Mechanical behaviour of bonded repaired composite plates
• Modelización numérica de casco EOD ante impacto de fragmento
• Multiple Necking Pattern in Nonlinear Elastic Bars Subjected to Dynamic Stretching: The Role of Defects and Inertia
• Non-uniform
  distributions of initial porosity in metallic materials affect the growth rate
  of necking instabilities in flat tensile samples subjected to dynamic loading
• Numerical Modelling of Multilayer Woven Para-aramid Fabrics
• Numerical Modelling of Soft Armour Panels Under High-Velocity Impacts
• Numerical analysis of a new combat helmet design against ballistic impact
• Numerical and experimental analysis of aramid composites against ballistic impact
• On the Interplay Between Macroscopic Localization and Void Coalescence for Strain Rate Sensitive Materials
• On the interplay between macroscopic localization and void coalescence for strain rate sensitive materials
• Thermal and mechanical stresses in a solar central receiver
• Thermal stress variation in a solar central receiver during daily operation

Projects

• Análisis y desarrollo de protecciones auxéticas para estructuras carbono/epoxi
• Design and manufacturing Rig support for double curved panels. Simulated bird (gelatine) impact on double curved panels. Hail (parallelepiped) impact on double curved panels
• Ensayos de impacto de esfera de hielo sobre paneles de titanio microperforado
• Estudio del comportamiento frente a impacto y post-impacto de palas de aerogenerador fabricadas de estructuras sándwich
• GRAPHENE Core 2: Graphene-based revolutions in ICT and beyond
• Numerical Modeling of Self Piercing Riveting
• Optimización del diseño de protecciones personales mediante el empleo de modelos numéricos
• PURPOSE: Opening a new route in solid mechanics: Printed Protective Structures (ERC Starting Grant 2017)
• QUANTIFY: Unraveling the role of anisotropy in material failure
• Respuesta estructural de panel aeronáutico de antena RX sometido a cargas de impacto. Pedido nº 4300178267/10
• Science is coming: la ciencia que está creando tu futuro
• Un desafío pendiente en Mecánica de Sólidos: el efecto de la anisotropía y la porosidad en la resistencia mecánica y la ductilidad de metales impresos

Supervised Theses

• Análisis
  de los efectos de borde en laminados de material compuesto mediante modelos
  numéricos
• Análisis
  experimental y numérico de reparaciones adhesivas de laminados delgados
• Análisis
  y modelización del proceso de fractura dúctil en materiales plásticos y
  viscoplásticos
• Análisis del comportamiento a compresión después de impacto (CAI) de laminados delgados.
• Modelos de celda y del Continuo Generalizado para el análisis del comportamiento dinámico de sólidos estructurados