Outputs for MATERIALS SCIENCE AND ENGINEERING AND CHEMICAL ENGINEERING Department (Year 2016)
|
Articles
- A new approach to understand the contribution of the microstructure in the fracture behavior of sintered steels
- Application of magnesium hydroxide nanocoatings on cellulose fibers with different refining degrees
- Aromatic ionic monomer bearing perfluorosulfonate moiety and its polycondensation toward high performance superacid ionomers
- Assessment of mechanical behavior of PLA composites reinforced with Mg micro-particles through depth-sensing indentations analysis
- Axial ligand effect on the catalytic activity of biomimetic Fe-porphyrin catalyst: an experimental and DFT study
- Bioactivity of dexamethasone-releasing coatings on polymer/magnesium composite
- Carbon nanotube scaffolds with controlled porosity as electromagnetic absorbing materials in the gigahertz range
- Chaos-based true random number generators
- Coherent Imaging without Phases
- Coupled Landau-Zener-Stuckelberg quantum dot interferometers
- Critical radius and temperature for buckling in graphene
- Cyclodextrin-grafted barium titanate nanoparticles for improved dispersion and stabilization in water-based systems
- Design of gel electrolytes for electrochemical studies on metal surfaces with complex geometry
- Development of sodium-conducting polymer electrolytes: comparison between film-casting and films obtained via green processes
- Duplex stainless steel self-ligating orthodontic brackets by micro-powder injection moulding
- Electrical and magnetic properties of NiZn Ferrite prepared by conventional and solar sintering
- Evaluation of polyolefin-based macroporous separators for high temperature Li-ion batteries
- Experimental method for the determination of material parameters of plasticity models for toughened adhesives
- Functionalization of reduced graphene oxide with polysulfone brushes enhance antibacterial properties and reduce human cytotoxicity
- Hamiltonian description of the parametrized scalar field in bounded spatial regions
- Hamiltonian dynamics of the parametrized electromagnetic field
- High porosity scaffold composites of graphene and carbon nanotubes as microwave absorbing materials
- High-performance Ni-YSZ thin-walled microtubes for anode-supported solid oxide fuel cells obtained by powder extrusion moulding
- Highly Phase Separated Aromatic lonomers Bearing Perfluorosulfonic Acids by Bottom-up Synthesis: Effect of Cation on Membrane Morphology and Functional Properties
- Identification of cancer related genes using a comprehensive map of human gene expression
- Influence of thermal debinding on the final properties of Fe-Si soft magnetic alloys for metal injection molding (MIM)
- Liquid phases tailored for introducing oxidation-sensitive elements through the master alloy route
- Master alloys for liquid phase sintering: Some key points for the design
- Maximum Entropy Closure of Balance Equations for Miniband Semiconductor Superlattices
- Mezclas asfálticas con betunes modificados con nanotubos de carbono. Diseño y propiedades
- Molybdeno-Aluminizing of Powder Metallurgy and Wrought Ti and Ti-6Al-4Valloys by Pack Cementation process
- Nanocomposite poly(vynilidene fluoride)/nanocrystalline cellulose porous membranes as separators for lithium-ion batteries
- Nanoindentation and wear behavior of thermally stable biocompatible polysulfone-alumina nanocomposites
- Newtonian and post-Newtonian passive Geolocation by TDOA
- On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels
- On the role of processing parameters in sintered new Co-based (W,Al) alloys
- Optical Tuning of Nanospheres Through Phase Transition: An Optical Nanocircuit Analysis
- Optical and morpho-structural properties of ZnO nanostructured particles synthesized at low temperature via air-assisted USP method
- PEG and PVP assisted solvothermal synthesis of NaYF4:Yb3+/Er3+ up-conversion nanoparticles
- Polyaromatic ionomers with a highly hydrophobic backbone and perfluorosulfonic acids for PEMFC
- Porous Ni-YSZ planar anodes by powder extrusion moulding employing PMMA as pore former
- Pseudospin lifetime in relaxed-shape armchair graphene nanoribbons due to in-plane phonon modes
- Q-colourings of the triangular lattice: exact exponents and conformal field theory
- Radial basis function interpolation in the limit of increasingly flat basis functions
- Realization problems for limit cycles of planar polynomial vector fields
- STM-driven transition from rippled to buckled graphene in a spin-membrane model
- Scanning electrochemical microscopy characterization of sol-gel coatings applied on AA2024-T3 substrate for corrosion protection
- Semiconductor-metal core-shell nanostructures by colloidal heterocoagulation in aqueous medium
- Silane pretreatment of electrogalvanized steels: effect on adhesive properties
- Soliton driven angiogenesis
- Solitonlike attractor for blood vessel tip density in angiogenesis
- Solvothermal synthesis of Ag/ZnO and Pt/ZnO nanocomposites and comparison of their photocatalytic behaviors on dyes degradation
- Stochastic model of tumor-induced angiogenesis: Ensemble averages and deterministic equations
- Structure and Rheology of Poloxamine T1107 and Its Nanocomposite Hydrogels with Cyclodextrin-Modified Barium Titanate Nanoparticles
- Study of the Fe-Ti/W system for joining applications in high-temperature fusion reactor components
- Synthetic Aperture Imaging of Direction- and Frequency-Dependent Reflectivities
- TEM-HRTEM study on the dehydration process of nanostructured Mg-Ca hydroxide into Mg-Ca oxide
- Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements
- The role of mesophases in the ordering of polymers
- Understanding the properties of low-cost iron-containing powder metallurgy titanium alloys
- Unravelling the complex nanostructure of La0.5-xLi0.5-xSr2xTiO3 Li ionic conductors
- Wavelength selection of rippling patterns in myxobacteria
- Welded, pickled stainless steel reinforcements: corrosion results after 9 years in mortar
- Welded, sandblasted, stainless steel corrugated bars in non-carbonated and carbonated mortars: a 9-year corrosion study
- Wetting phenomena for liquid Cu and Cu alloys on Fe-base substrate
Book Chapters
- Boronizing of iron-based alloys. In: Encyclopedia of iron, steel, and their alloys
- Carbon nanotube composites as electromagnetic shielding materials in GHz range. In: Carbon nanotubes - current progress of their polymer composites
- High energy ball milling as new tool for preparing polymer nanocomposites. In: Advances in nanotechnology
- Spectroscopic analysis of epoxy/thermoplastic blends. In: Handbook of Epoxy Blends
Conference Contributions
- Aleaciones base Co sinterizadas para su aplicación en condiciones severas: diseño de microestructuras gamma-gamma'
- Aleaciones de alta entropía como matriz metálica alternativa en cermets
- Antifungal properties of MgO, ZnO and Mg/Zn Oxide nanoparticles for the protection of stone heritage
- Antimicrobial materials based on LDPE filled with silver nanoparticles with potential uses in food industry
- Antimicrobial properties of RGO modified with Polysulfone Brushes and their nanocomposites
- Caracterización superficial de un material compuesto viniléster-fibra de vidrio
- Chemically modified hybrid thermosets: elastic behavior in the plateau regime of polyaminosiloxane-nitrile-DGEB
- Contact area actual self-friction in polyolefins
- Design and corrosion study of a hybrid organo-inorganic sol-gel coating for biomedical P/M titanium
- Design and evaluation of PM Ti surfaces modified by colloidal techniques and diffusion processes for biomedical applications
- Design and evaluation of powder metallurgy Ti and Ti6Al4V alloy surfaces modified by colloidal techniques and diffusion processes for applications in the biomedical sector
- Development and characterization of calcium conducting polymer electrolytes for the attainment of solvent-free batteries
- Diseño de nuevas aleaciones para sinter-brazing: cinética de la fase líquida
- Diseño y evaluación de superficies de titanio pulvimetalúrgico modificadas por técnicas coloidales y procesos de difusión para aplicaciones biomédicas
- Efecto de la adición del Zr en los precipitados de un acero ferrítico
- Efecto de la fatiga térmica en uniones adhesivas acero/CFPR unidos con cinta adhesiva de doble cara
- Effect of Zr source on oxide dispersion in ferritic ODS Steel with addition of group 4 elements (Y-Al-Ti-Zr)
- Effect of low-pressure plasma treatment on surface modification and friction coefficient of poly-(methyl-methacrylate)
- Electrochemical performances of SPSU/Zn,Al-heptamolibdate LDH hybrid membranes for proton exchange membrane fuel cells
- Ensemble-averaged and deterministic descriptions of tumor-driven angiogenesis
- Espumas de fase MAX Ti2AlC: procesamiento por técnica pulvimetalúrgica y caracterización
- Estudio del efecto de la influencia de la temperatura y humedad en las propiedades eléctricas de la perovskita doble LiLa2NbO6: un nuevo sensor de humedad
- Estudio del efecto de la síntesis de nanopartículas de Ni sobre cerámicas no oxídicas de Ti(C,N) durante el proceso de sinterización
- FDOA determination of velocities and emission frequencies of passive radiotransmitters in space
- Fatiga térmica en uniones adhesivas acero/composite unidos con adhesivos piezosensibles
- From lithium to post-lithium batteries: Na & Ca-conducting solvent-free polymer electrolytes
- Hamiltonian dynamics of the parametrized electromagnetic field
- High porosity Graphene/Fe3O4 scaffolds for Electromagnetic Interference Shielding
- Infl uencia del tratamiento de plasma de baja presión en la durabilidad de materiales compuestos LDPE-lino/coco
-
Influencia del disolvente y de la presencia de silanos sobre el
desarrollo de recubrimientos superhidrofóbicos - Influencia del porcentaje de silanos en recubrimientos superhidrofóbicos con nanomartículas de sílice y White Spirit
- Kempe reconfiguration and Potts antiferromagnets
- La Alhambra, Escher y 17. ¡El número mágico!
- Low-cost alfa+beta PM Ti alloys by Fe/Ni addition to pure Ti
- Microstructural possibilities of Co-Al-W alloys processed by SPS: effects of Al and W contents
- Misner space as a (toy) counterexample to almost anything
- Nanocomposites based on LDPE filled with carbon nnotubes and their Potential Bactericide Activity
- Nanocomposites based on polysulfone filled with TiO2 prepared by solution blow spinning
- Neutron radiography as a tool for monitoring the effectiveness of consolidant nanomaterials applied to the stone heritage
- Nonlinear quantum mechanics
-
Nonlinear regimes of axially-conned vertical capillary
jets - Obtención y Caracterización del Sistema Híbrido ZnO/CNTs
- On the realization of limit cycles in planar polynomial systems
- Optical and morpho-structural properties of ZnO nanoparticles synthesized from aqueous solutions at low temperature by air-assisted-USP method
- Optimization of the process parameters of a hybrid organo-inorganic solgel coating synthesis for biomedical P/M titanium
- Parametrized theories, making EM even "gaugier"
- Parametrized theories, making EM even "gaugier"
- Playing with the Misner space and the topology
- Polymerization kinetics of acrylic bone cement: effect of two different antibiotics
- Poquito a poco me voy cuantizando
- Porous 430L supports for solid oxide fuel cells applications produced by powder extrusion moulding employing PMMA and corn starch as pore formers
- Preparation, characterization and electrochemical study of lanthanum-silica sol-gel thin films
- STM driven transition from rippled to buckled graphene in a spin-membrane model
- Self-healing of asphalt mixes, containing conductive modified bitumen, using microwave heating
- Sol-gel TiO2 and ZrO2-nanocomposite thin films for enhancing in vitro biocompatibility and bio-corrosion resistance of Ti6Al4V orthopaedic implants
- Solvent-free polymer electrolytes based in sodium salts towards the development and characterization of post Li-ion batteries
- Spectroscopic tools to study and interpret macromolecular dynamics at a molecular scale
- Spectroscopy of Er3+ ions in Li5La3Nb2O12 garnets
- Spontaneous chaotic oscillations and noise in a semiconductor superlattice model
- Spontaneous chaotic oscillations at room temperature in a semiconductor superlattice model
- Staphylococcus aureus adherence decrease on hybrid organo-inorganic sol-gel coating
- Structural and functional properties of ZnO/Si heterojunction structures fabricated by USP technique from non-aqueous solutions
- Study of the biocompatibility and corrosion resistance of hydroxyapatite sol-gel thin coatings on Ti6Al4V alloy
- Study of the influence of humidity and temperature on the electrical properties of the doubled perovskite LiLa2NbO6: a new humidity sensor
- Sustitución de uniones soldadas por uniones adhesivas en nodos con concentración de tensiones en superestructuras de autocar
- Synthesis and characterization of DABCO-functionalized polysulfones as anion-exchange membranes for fuel cells applications
- Synthesis and characterization of Ti(C,N)-[Ni/Fe/FeNi] core-shell cermets fabricated by one-pot chemical route
- Síntesis y caracterización de membranas de intercambio aniónico para su aplicación como electrolitos en pilas de combustible: efecto del grado de entrecruzamiento
- Síntesis y caracterización de semiconductores nanoestructurados de óxidos metálicos (ZnO) dopados con tierras raras y metales de transición para aplicaciones fotocatalíticas
- Síntesis y caracterización de sistemas híbridos basados en ZnO preparados mediante el método Spray Pirolisis (USP) para aplicaciones fotocatalíticas
- The space of embeddings within the Hamiltonian formulation of the electromagnetism
- Ti(C,N)-Fe/Ni/FeNi Core-Shell Structures for Cermets Processing
- Ti2AlC and Ti3SiC2 MAX phase foams: processing, porosity characterization and connection between processing parameters and porosity
- Tumor induced angiogenesis
- Tumor induced angiogenesis: ensemble averages and solitons
- ¡Se oyen, se sienten, las ondas gravitatorias están presentes!
- ¿Sabía Escher Topología?
- ¿Tratamientos superficiales y/o cambio de adhesivo?
Projects
- Caracterización de membranas poliméricas para su utilización en baterías de flujo
- Compuestos cerámica-metal y aleaciones refractarias de W para su aplicación bajo condiciones de servicio severas: diseño microestructural y nuevas rutas de procesamiento
- Desarrollo de Electrolitos de Sodio para Baterías Post-Litio de Estado Sólido.
- Desarrollo de antenas emisoras/receptoras con nueva tecnología "ALMA" para su aplicación en sistema de acceso seguro basado en tecnología PKE
- Desarrollo de superficies híbridas biofuncionalizadas y resistentes a tribocorrosión sobre nuevas aleaciones de Ti
- Estabilidad microestructural de aceros ferríticos ODS para futuros sistemas de energía
- KrEaTive Habitat: Transferencia de tecnología desde las Tecnologías Facilitadoras Esenciales (KET) hacia aplicaciones de mercado de la Industria Creativa relacionadas con los materiales de la industria del Hábitat en el espacio Sudoe
- Materiales para baterias de litio, post litio y pilas de combustible: del laboratorio al prototipo
Supervised Theses
- Assessment of the eutectic trough and properties of a multiphase alloy in the nial-cr-w system
- Comportamiento de armaduras de acero inoxidable en morteros con cenizas volantes
- Desarrollo y optimización del proceso de Moldeo por Inyección de Metales (MIM) de aleaciones magnéticas blandas base hierro.
- Development of a Bio-based Binder for its Application in the Mineral Wool Insulation Material
- Diseño y desarrollo de nanopartículas de alúmina con cadenas de polisulfona injertadas y su efecto compatibilizante en nanocomposites de polisulfona
- Diseño y desarrollo de sistemas ligantes ecológicos para moldeo por inyección de polvos como una nueva ruta de procesamiento del circón.
- Diseño, caracterización y comportamiento en servicio de materiales basados en Ácido Poliláctico (PLA) con potencial utilidad en el empaquetado de alimentos.
- Diseño, caracterización y comportamiento en servicio de materiales basados en ácido poliláctico (PLA) con potencial utilidad en el empaquetado de alimentos
- High order numerical methods for myxobacteria pattern formation
- Microstructure and mechanical response of nanostructured bainitic steels.
- Modelo y simulación numérica del transporte electrónico en superredes semiconductoras en un campo magnético externo.
- Modificación de grafeno con cadenas de polisulfona e incorporación a matrices poliméricas. Evaluación de las propiedades y de la biocompatibilidad de los nanocomposites
- Multifunctional layered double hydroxide (Ldl) based epoxy nanocomposites
- Síntesis y caracterización de sistemas híbridosmetal-óxido de tierras raras con propiedades ópticas por spray pirólisis y síntesis asistida por microondas de soluciones sólidas de tierras raras