Outputs for MATERIALS SCIENCE AND ENGINEERING AND CHEMICAL ENGINEERING Department (Year 2013)
|
Articles
- A fully scalable online pre-processing algorithm for short oligonucleotide microarray atlases
- A generalized Beraha conjecture for non-planar graphs
- An efficient method for the carboxylation of few-wall carbon nanotubes with little damage to their sidewalls
- Application of the RBF meshless method to laminar flame propagation
- Assessment of atmospheric plasma treatment cleaning effect on steel surfaces
- Atmospheric plasma torch treatment of aluminium: improving wettability with silanes
- Band structure in the polymer quantization of the harmonic oscillator
- Brain Stroke Detection by Microwaves Using Prior Information from Clinical Databases
- Characterization of 430L porous supports obtained by powder extrusion moulding for their application in solid oxide fuel cells
- Coefficient of thermal expansion of TiO2 filled EVA based nanocomposites. A new insight about the influence of filler particle size in composites
- Colloidal approach for the design of Ti powders sinterable at low temperature
- Composites based on HDPE filled with BaTiO₃ submicrometric particles. Morphology, structure and dielectric properties
- Coupled multiphysics, barrier localization, and critical radius effects in embedded nanowire superlattices
- Defining the optimal lymphadenectomy cut-off value in epithelial ovarian cancer staging surgery utilizing a mathematical model of validation
- DepthTools: an R package for a robust analysis of gene expression data
- Detection in a single experiment of thermal transitions of the constituents in PS/BaTiO3 composites
- Development of high performance powder metallurgy steels by high-energy milling
- Dimensional consistency achieved in high-performance synchronizing hubs = Consistencia dimensional en cubos de sincronización de alto rendimiento
- Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks
- Effect of stress level on the high temperature deformation and fracture mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: an In Situ experimental study
- Effect of tetraethoxysilane coating on the improvement of plasma treated polypropylene adhesion
- Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks
- Effects of noise on hysteresis and resonance width in graphene and nanotubes resonators
- Electrical control of phonon-mediated spin relaxation rate in semiconductor quantum dots: Rashba versus Dresselhaus spin-orbit coupling
- Electrochemical detection of extracellular hydrogen peroxide in Arabidopsis thaliana: a real¿time marker of oxidative stress
- Flexible PVDF-BaTiO₃ nanocomposites as potential materials for pressure sensors
- Flexural properties, thermal conductivity and electrical resistivity of prealloyed and master alloy addition powder metallurgy Ti-6Al-4V
- Flow, thermal and structural application of Ni-foam as volumetric solar receiver
- From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels
- From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels
- Halloysite-TiO2 nanocomposites: Synthesis, characterization and photocatalytic activity
- High Temperature Transformations in a Steel-TiCN cermet
- Hot deformation behavior and workability characteristics of AZ91 magnesium alloy powder compacts-A study using processing map
- Improvement of sintering behaviour of titanium by colloidal techniques
- Influence of Sintering Parameters on the Properties of Powder Metallurgy Ti-3Al-2.5V Alloy
- Influence of carbon content on the sinterability of an FeCr matrix cermet reinforced with TiCN
- Influence of process parameters on the corrosion resistance of corrugated austenitic and duplex stainless steels
- Influence of strain-induced martensite in the anodic dissolution of austenitic stainless steels in acid medium
- Is the five-flow conjecture almost false?
- Mechanical behaviour of pressed and sintered CP Ti and Ti-6Al-7Nb alloy obtained from master alloy addition powder
- Modification of glass surfaces adhesion properties by atmospheric pressure plasma torch
- New insights on the self-organization of PEG/alpha-cyclodextrin- based Polyrotaxanes in solution: an experimental and theoretical study
- Numerical methods for kinetic equations in semiconductor superlattices
- Oxidation of Micro-Sized Aluminium Particles: Hollow Alumina Spheres
- Oxygen and ionic transport in hydrogel and silicone-hydrogel contact lens materials: an experimental and theoretical study
- Palygorskite-TiO2 nanocomposites: Part 2. photocatalytic activities in decomposing air and organic pollutants
- Powder injection moulding: processing of small parts of complex shape
- Pressed and sintered AISI 4140 PM low alloy steel from gas atomised powders
- Procesamiento coloidal de compuestos metalocerámicos en base Fe con alto contenido de refuerzo cerámico Ti(C,N) = Colloidal processing of Fe-based metalceramic composites with high content of ceramic reinforcement
- Propagation of premixed laminar flames in 3D narrow open ducts using RBF-generated finite differences
- Properties of AZ91 alloy produced by spark plasma sintering and extrusion
- Recovering fluorophore location and orientation from lifetimes
- Robust depth selectivity in mesoscopic scattering regimes using angle-resolved measurements
- Robust imaging of localized scatterers using the singular value decomposition and l(1) minimization
- Rubber particles from tires out of use as toughness modifiers of epoxy-based thermosets
- Sawtooth patterns in force-extension curves of biomolecules: An equilibrium-statistical-mechanics theory
- Spin echo dynamics under an applied drift field in graphene nanoribbon superlattices
- Spin transition rates in nanowire superlattices: Rashba spin-orbit coupling effects
-
Structural characterisation and Li conductivity of Li1/2-xSr2xLa1/2-xTiO3 (0
- Structural, morphological and luminescence properties of nanocrystalline up-converting Y₁.₈₉Yb₀.₁Er₀.₀₁O₃ phosphor particles synthesized through aerosol route
- Structure and morphology of composites based on polyvinylidene fluoride filled with BaTiO3 submicrometer particles: effect of processing and filler content
- Surface phenomena during the early stages of sintering in steels modified with Fe-Mn-Si-C master alloy
- TEM-STEM study of europium doped gadolinium oxide nanoparticles synthesized by spray pyrolysis
- Temperature-dependent dynamical nuclear polarization bistabilities in double quantum dots in the spin-blockade regime
- The Hintermann-Merlini-Baxter-Wu and the infinite-coupling-limit Ashkin-Teller models
- The microstructural evolution of a pre-alloyed AZ91 magnesium alloy powder through high-energy milling and subsequent isothermal annealing
- Thermal stability and degradation kinetics of feedstocks for powder injection moulding - A new way to determine optimal solid loading?
- Transport in semiconductor nanowire superlattices described by coupled quantum mechanical and kinetic models
- Two-dimensional Potts antiferromagnets with a phase transition at arbitrarily large q
- Utilização de micro partículas de cortiça como material de reforço em adesivos estruturais fràgeis = Utilization of microparticles of cork as reinforcing material for fragile structural adhesives
Book Chapters
- Comportamiento frente a la corrosión de corrugados dúplex de baja aleación en disoluciones simuladas de poros de hormigón. In: Armaduras de acero inoxidable
- Influencia del corrugado en la durabilidad de las barras austeníticas en medios sin carbonatar y con cloruros. In: Armaduras de acero inoxidable
Conference Contributions
- ACET and EIS assessment of high performance powder coatings duplex systems
- Application of COUPLING Model to study of materials with Perovskite and NASICON-type structure
- Atmospheric Pressure Plasma Improvement of the Adhesive Properties of Woven Aramid for Ballistic Applications
- Avoiding the inverse crime in the inverse problem of electrocardiography: estimating the shape and location of cardiac isquemia
- Behaviour of fluids in porous materials
- Bionanocomposites from Cyclodextrin-modified BaTiO3 and Block Copolymers PEO and PPO
- Bionanocomposites from Cyclodextrin-modified BaTiO3 and Block Copolymers PEO and PPO
- Caracterización de membranas poliméricas de polisulfona sulfonada cargada con nanopartículas de un hidróxido doble laminar (LDH). Estudio de sus prestaciones eléctricas en una monocelda PEM
- Caracterización superficial del tratamiento de plasma atmosférico sobre cerámica vitrificada
- Ceramic filled epoxy coatings on plasma activated glass fibre reinforced polymer based composites
- Ceramic filled epoxy coatings on plasma activated glass fibre reinforced polymer based composites
- Characterization of composite materials (metal-polymeric matrix reinforced with SiC) using acoustic emission
- Characterization of composite materials (metal-polymeric matrix reinforced with SiC) using acoustic emission
- Comparison of Microstructure and Properties of Ti-6Al-7Nb Alloy Processed by Different Powder Metallurgy Routes
- Comportamiento de superficies de mineral de mica bajo el impacto de iones plasmógenos
- Comportamiento mecánico de nanocomposites de matriz polimérica
- Corrosion Protection Studies of Hybrid Sol-Gel Coatings modified by Amine Crosslinker on AA2024-TE: Global and Local Electrochemical Evaluation
- Defects and Ripples in Graphene
- Design of titanium-alumina aqueous suspensions for processing by pressure slip casting
- Desing of titanium-alumina aqueous suspensions for processing by pressure slip casting
- Development and microstructural characterization of nanostructured Fe-Cr-Al-W ODS alloys
- Dislocations in graphene
- Effect of debinding and sintering atmospheres of low expansion invar alloy for mu-PIM
- Effect of Processing Conditions on the Structure and Morphology of Polylactic acid-Kaolin Composites
- Effect of Silica Nanoparticles on Thermal Properties of Polysulfone Based Nanocomposites. Analysis of the Morphological and Mechanical Factors Affecting Thermal Behavior of the Composites
- Effect of sintering temperature on the formation of intermetallics in Al-Fe-B nanocomposite
- Effect of the Presence of BaTiO3 Submicrometric Particles on the Morphology and Crystallization of Polyvinilidene Fluoride
- Experimental method for the determination of material parameters of plasticity models for toughened adhesives
- Experimental method for the determination of material parameters of plasticity models for toughened adhesives
- Fabrication of Ni-YSZ tubes by powder extrusion moulding for SOFC electrolytes
- Feedstock development based on eco-friendly binder system for powder injection moulding
- Growth of ZnO structures with different morphology by hexamethylenetetramine-hydrothermal method
- Influencia del peso molecular del antibiótico en las propiedades del PMMA
- Introduction of Oxidation-Sensitive Elements in Low Alloyed Steels using the Master Alloy Route: Key Aspects for Success
- Inverse source problem in mesoscopic scattering regimes using angle-resolved measurements
- Lean steels modified with a new Cu base master alloy: influence of process parameters in dimensional and sintering behavior
- Li+/H+ Exchange reactions in La0,52Li0,44TiO3
- Low expansion invar alloy for mu-PIM carbon and oxygen content controlling by sintering atmosphere
- Magnetic non-contact harmonic drive
- Mechanical characterization of steel-polyurethane and steel-silicone structural joints by means of fatigue tests
- Mejora de la adhesión de tejidos de aramida para su empleo en blindajes ligeros
- Mejora de la resistencia frente a la corrosión de aleaciones de titanio en ambiente aeronáutico mediante tratamientos superficiales
- Microtubular SOFC base on an extruded support
- Modification of a powder metallurgy gamma-TiAl alloy microstructure by heat treatments
- Near Infrared spectroscopy to study thermal transitions of PMMA and PMMA/SiO2 nanocomposites
- New alloying systems for PM-steels: opportunities for the Mn-Si master alloys
- On the influence of vacancies distribution on the structure and ionic conductivity of La-Li-Sr-Ti-O system with perovskite structure
- On the origen of the deviation from Vegard's law in the Li1/2-xSr2xLa1/2-xTiO3 solid solution
- Optimización de la adhesión de tejidos con aplicaciones balísticas
- Optimization of eco-friendly binary binder system for powder injection molding
- Polymerization kinetics of boron carbide/epoxy resin composite
- Preparation and characterization of a novel hybrid organic-inorganic sol-gel coating modified by an amine crosslinker
- Processing of Elemental Titanium by Powder Metallurgy Techniques
- Propiedades Termo-Mecánicas de materiales compuestos de Polietileno/Boro
- Refining the microstructure of a Fe matrix cermet reinforced with TiCN by mechanical milling
- Silane coatings as adhesion promoters of anaerobic adhesives : study of the effect of the Silane solution Ph = Recubrimientos silano como promotores de la adhesión de adhesivos anaeróbicos: Estudio del efecto del pH
- Strain and Rotation Fields of Dislocations in Graphene
- Structural characterization and Li-ion conduction in garnet-typeLi5+XLa3-XSrXNb2O12 (0 ≤ x ≤ 2)
- Study of correlation between steel roughness, surface energy and adhesion properties
- Supramolecular epoxy thermosets base don cyclodextrin complexes
- Surface Molybenizing-Aluminzing of wrought and powder metallurgy Ti and Ti6Al4V by halide activated pack cementation
- Synthesis and characterization of PEEK-PES-WC copolymers for fuel cell proton exchange membrane application
- Synthesis and luminescence properties of multifunctional Ag/Y2O3: Eu3+ hybrid nanostructures with zero dimension
- The effect of amount of micro particles in Chemicals kinetic reactions o fan adhesive reinforced with cork
- The effect of moisture in adhesives reinforced with micro particles of cork
- The effect of moisture in adhesives reinforced with micro particles of cork
- Thermal Transitions of the Constituents in PS/BaTiO3 Composites. Use of Fluorescence Spectroscopy to obtain Information at Nanoscale
- Thermal and Mechanical Properties of Epoxy/SiC Composites Degraded by Moisture and Temperature
- Titania-loaded hybrid sol-gel thin films as pretreatments for improving the barrier properties and bioactivity of Ti6Al4V alloy
- Understanding thermal transitions in Polystyrene-Barium titanate nanocomposites using Fourier transform infrared spectroscopy
- Uniformly dispersed submicrometric BaTiO₃ particles in HDPE based composites
- Uniformly dispersed submicrometric BaTiO3 particles in HDPE based composites. Morphology, structure and dielectric properies
- Wettability between iron matrix and TiCN reinforcement of cermets at high temperature
- Wettability study of liquid promoters for improved liquid phase sintering process of steels
Projects
- Diseño de la Microestructura y la Microarquitectura de materiales metal-cerámicos utilizando Tecnología Coloidales y Pulvimetalúrgicas
- Fundamentos teóricos de la gravedad cuantica de lazos: metodos de teoria de campos y física estadística, algebra de ligaduras y horizontes cuanticos.
- GreenGELAIR:Application of sol-gel technologies on low weight green metallic fuselage section
- HINMICO: High throughput integrated technologies for multimaterial functional Micro Components
- Preparación superficial mediante corte con un ultracriomicrotomo de muestras de materiales compuestos basados en resinas epoxi reforzadas con fibra de vidrio para la inspección y visualización posterior por técnicas de microscopía.
- Programa de becas de "la Caixa" para cursar estudios de Doctorado en Universidades Españolas
- Viabilidad del proceso de atomización de Fe-xMn-yC en gas. Estudio de variables físicas y químicas y parámetros para su industrialización