Outputs for MATERIALS SCIENCE AND ENGINEERING AND CHEMICAL ENGINEERING Department (Year 2010)
|
Articles
- 3D Level Set Reconstruction of Model and Experimental Data in Diffuse Optical Tomography
- A Novel Method for Producing Al-Foams and Evaluation of their Compression Behavior
- Aerosol Route in Processing of Nanostructured Phosphor Materials
- Application of the RBF Meshless Method to the Solution of the Radiative Transport Equation
- Boride Coatings Obtained by Pack Cementation Deposited on Powder Metallurgy and Wrought Ti and Ti-6Al-4V
- Composites Formed by Glass Fibers and PS-Modified Epoxy Matrix. Influence of the Glass Fibers Surface on the Morphologies and Mechanical Properties of the Interphases Generated
- Control of wettability of polymers by surface roughness modification
- Controlling Edge Morphology in Graphene Layers Using Electron Irradiation: From Sharp Atomic Edges to Coalesced Layers Forming Loops
- Controlling High Coercivities of Ferromagnetic Nanowires Encapsulated in Carbon Nanotubes
- Cutting Performance of TiCN-HSS Cermet in Dry Machining
- Detailed Black Hole State Counting in Loop Quantum Gravity
- Determination of Mechanical and Corrosion Properties of Boride Coating on P91 Steel
- Effect of Dopants on the Phase Stability of Zirconia-Based Plasma-Sprayed Thermal Barrier Coatings
- Effect of austempering conditions on the microstructure and tensile properties of low alloyed sintered steel
- Effects of Ozone in Surface Modification and Thermal Stability of SEBS Block Copolymers
- Efficient Dispersion of Nanoparticles in Thermoplastic Polymers
- Experimental and Theoretical Methods for Optimal Solids Loading Calculation in MIM Feedstocks Fabricated from Powders with Different Particle Characteristics
- Extreme durability of wettability changes on polyolefin surfaces by atmospheric pressure plasma torch
- Graphene and Graphite Nanoribbons: Morphology, Properties, Synthesis, Defects and Applications
- Hydrolysis study of bis-1,2-(triethoxysilyl)ethane silane by NMR
- Influence of Fe content and particle size the on the processing and mechanical properties of low-cost Ti&-xFe alloys
- Influence of Particle Size Distribution and Chemical Composition of the Powder on Final Properties of Inconel 718 Fabricated by Metal Injection Moulding (MIM)
- Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks
- Introduction to the Special Issue on Electromagnetic Inverse Problems: Emerging Methods and Novel Applications
- Kaolin-Epoxy-Based Nanocomposites: A Complementary Study of the Epoxy Curing by FTIR and Fluorescence
- Molecular probe technique for determining local thermal transitions: The glass transition at Silica/PMMA nanocomposite interfaces
- Morphological, Structural and Electrochemical Properties of Lithium Iron Phosphates Synthesized by Spray Pyrolysis
- Multifunctional sol-gel derived thin film based on nanocrystaline hydroxyapatite powders
- Nanomaterials Research: A Big Step for Ecuador
- Nanostructured Alumina Particles Synthesized by the Spray Pyrolysis Method: Microstructural and Morphological Analyses
- Nonequilibrium Dynamics of a Fast Oscillator Coupled to Glauber Spins
- Observation of Magnetic Edge State in Graphene Nanoribbons
- On the non-ergodicity of the Swendsen-Wang-Kotecký algorithm on the kagomé lattice
- Phase Diagrams and Switching of Voltage and Magnetic Field in Dilute Magnetic Semiconductor Nanostructures
- Phase Transitions in a Mechanical System Coupled to Glauber Spins
- Phase-Separation Process in a Poly(Methyl Methacrylate)-Modified Epoxy System: A Novel Approach to Understanding the Effect of the Curing Temperature on the Final Morphology
- Photo-Excited Semiconductor Superlattices as Constrained Excitable Media: Motion of Dipole Domains and Current Self-Oscillations
- Photoluminescent Properties of Nanostructured Y2O3:Eu3+ Powders obtained through Aerosol Synthesis
- Preparation of cycloaliphatic epoxy hybrids with non-conventional amine-curing agent
- Quantization of Midisuperspace Models
- RBF-FD Formulas and Convergence Properties
- Radial Basis Function Solution of the Motz Problem
- Raman and Fluorescence Spectroscopic Studies of a DNA-Dispersed Double-Walled Carbon Nanotube Solution
- Sharpening the Chemical Scissors to Unzip Carbon Nanotubes: Crystalline Graphene Nanoribbons
- Structural Changes to Aid Science in Developing Countries
- Structural Level Set Inversion for Microwave Breast Screening
- Structural and Mechanical Characterization of gamma-Methacryloxypropyltrimethoxysilane (MPS) on Zn-Electrocoated Steel
- Structure and Thermostability of PMMA in PMMA/Silica Nanocomposites: Effect of High-Energy Ball Milling and the Amount of the Nanofiller
- Study by XPS of an Atmospheric Plasma-Torch Treated Glass: Influence on Adhesion
- Study through Potentiodynamic Techniques of the Corrosion Resistance of Different Aluminium base MMC's with Boron Additions
- Symmetry Effects and their Influence on the Mechanical Behavior of Open and Closed Cell Al Foams
- Synthesis of Nanostructured Particles for Li-ion Cathodic and Anodic Materials obtained by Spray Pyrolysis
- Síntesis de partículas nanoestructuradas para materiales catódicos y anódicos obtenidos mediante Spray Prólisis = Synthesis of Nanostructured Particles for Li-ion Cathodic and Anodic Materials obtained by Spray Pyrolysis
- The Effect of Al and Cr Additions on Pack Cementation Zinc Coatings
- The Effect of Surface Treatment on the Behaviour of Toughened Acrylic Adhesives/GRP (Epoxy) Composite Joints
- The Influence of pH on the Hydrolysis Process of gamma-Methacryloxypropyltrimethoxysilane, Analyzed by FT-IR, and the Silanization of Electrogalvanized Steel
- Tunable Raman Spectroscopy Study of CVD and Peapod-Derived Bundled and Individual Double-Wall Carbon Nanotubes
- Two Miniband Model for Self-Sustained Oscillations of the Current through Resonant-Tunneling Semiconductor Superlattices
Books
Book Chapters
- Fluorescence of Polymers at Interfaces: Polymerization, Relaxations, and Imaging. In: Reviews in Fluorescence 2010
- Homogeneus Branched-Chain Explosions. In: Progress in Industrial Mathematics at ECMI 2008
- Meshless Solution of Singular Potential Flows in Strong Formulation. In: Progress in Industrial Mathematics at ECMI 2008
- Nonlinear Electron and Spin Transport in Semiconductor Superlattices. In: Progress in Industrial Mathematics at ECMI 2008
- Radial Basis Function (RBF) Solution of the Motz Problem. In: Progress in Industrial Mathematics at ECMI 2008
- Relocation Dynamic during Voltage Switching in Spin-Polarized Superlattices. In: Progress in Industrial Mathematics at ECMI 2008
- Self-Sustained Spin-Polarized Current Oscillations in Multiquantum Well Structures. In: Progress in Industrial Mathematics at ECMI 2008
- Theory of Surface Deposition from Boundary Layers Containing Condensable Vapor and Particles. In: Progress in Industrial Mathematics at ECMI 2008
Conference Contributions
- Aleación biomética de titantio Ti-6Al-7Nb producida mediante técnicas pulvimetalúrgicas
- Approaches to poly(tetrafluoroethylene) adhesive bonding
- Biomedical Ti-6Al-7Nb Titanium Alloy Produced by P/M Techniques
- Boronizado de Ti y Ti-6Al-4V pulvimetalúrgicos y comparación con boronizado de sustratos Ti-6Al-4V convencionales
- Effect of EtOH/H2O ratio and pH on bis-sulfur silane solutions for electrogalvanized steel joints based on anaerobic adhesives
- Fabrication of Glass Components by Powder Injection Moulding (PIM) Recycling Glass Water
- Influence of Matrix Composition on the Sinterability and Properties of Fe-Based Cermets Reinforced with TiCN Particles
- Influencia del contenido de carbono en el procesado y propiedades de un cermet de matriz FeCr reforzados con TiCN
- Rheological Behaviour of Powder Injection Moulding (PIM) Feedstocks Fabricated with a Thermoplastic Binder System Based on Polysaccharides
- Rheological and Thermal Behavior of Powder Injection Moulding (PIM) Feedstocks fabricated with Binder Systems based on Waxes
- Sol-gel derived nanocrystalline hydroxyapatite coatings preparation, characterization, evaluation of the bioactivity and corrosion protection behavior.
- Static and Dynamics of a Harmonic Oscillator Coupled to a one-Dimensional Ising System
- The Post-Newtonian Geolocation Problem by TDOA
- The use of dolomite as foaming agent and its effect on the microstructure of aluminium metal foams—Comparison to titanium hydride
- Tin influence during on sintering of prealloyed and premixed Al-Cu powders
Patents
Projects
- BIONANOFUN: BIOcomposite NANOstructured FUNctional graded materials with predistable properties for vertebrae grafts (AA CC Modalidad D)
- DESARROLLO DE ALEACIONES AVANZADAS GAMMA TIAL PARA COMPONENTES DE ELEVADAS PRESTACIONES POR TECNICAS PULVIMETALURGICAS
- Determinación de conductividad eléctrica superficial en laminados de fibra de carbono
- Determinación de fracción cristalina y caracterización en muestras de POM para una función de deslizamiento entre ejes de dirección en automóviles.
- Development of MIM process for a nickel base alloy
- Estudio de cargas soportadas por pieza obtenida por moldeo rotacional
- Estudio y caracterización de un material termoplástico cargado con nanofibras de carbono para procesos de moldeo rotacional con aplicaciones para la industria aeronáutica
- FALCO: Functionally graded nanostructured AL-based Composite foams for healthy and safety transportation (AA CC Modalidad D)
- LocMoTIC. Localización del Origen de Arritmias Cardíacas Mediante Modelado y Tecnologías de la Información y Comunicaciones
- MEDCO: Desarrollo de recubrimientos monocapa autorreparantes de altas prestaciones anticorrosivas
- Materiales estructurales avanzados
- Materiales estructurales avanzados (TP-UC3M)
- Materiales para contrapesos y lastres industriales con base hormigón
- Materiales para la energía y relacionados.
- Obtencion y procesado de aleaciones FE-CR endurecidas por dispersión de óxidos.
- PROCESAMIENTO POR ASOCIACIÓN DE TECNICAS COLOIDALES Y PULVIMETALURGICAS PARA EL DISEÑO DE ESTRUCURAS NANOCOMPUESTA METALOCERAMICAS
- Síntesis y Aplicaciones de Nanotubos de Carbono Dopados